BQ27530YZFR-G1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BQ27530YZFR-G1 is a powerful integrated single-chip fuel gauge IC specifically designed for battery-operated electronic systems. It integrates several functions such as Li-ion or Li polymer fuel gauge, battery discharge and charge parameter measurements, cell balancing, and battery temperature and battery health monitoring. Its application field is mainly about PMIC (Power Management ICs) for battery management and its working principle is based on the resimulation of fuel gauging techniques.

PMICs are widely used in mobile and consumer electronics products as they are designed to provide a wide range of power supply management capabilities. It is essential to correctly manage the battery power supply in order to maximize the battery performance, while ensuring a reliable and safe performance of the system. Thus, battery management is a critical part of any large-scale consumer electronics device and in battery-driven systems the IC plays an essential role.

The BQ27530YZFR-G1 is unique in its ability to accurately monitor state of charge and discharge performance of a cell or battery, even in low and wide temperature conditions. It also includes a wide range of safety measures, such as overvoltage and undervoltage protection, to prevent disasters from happening. Additionally, the chip can also monitor further parameters such as stability, temperature and battery health —a technique that is gaining in popularity in the consumer electronics industry.

To provide accurate measurements, the BQ27530YZFR-G1 uses a resimulation of fuel gauging techniques, more specifically the coulomb counting. This technique is based on the measurement of charge and discharge currents over a certain period of time (a few minutes or hours) as well as the cell voltage, from which the state of charge or SoC can be accurately determined.

The cell voltage is monitored on both the charging and discharging cycles by using a standard voltage measurement circuit. The charge or discharge current is sensed using a shunt resistor on the output of the system and is used to update the internal state of the chip. The impulse-character of the current measurements is used to distinguish between charging and discharging cycles, whereas an incremental integration of the current measurements provides an accurate charge and discharge state of the system.

Additionally, the BQ27530YZFR-G1 chip also supports cell balancing. Cell balancing is essential for high capacity batteries that are composed of many cells, in order to ensure the correct operation of the battery and to avoid overcharging or overdischarging of a single cell. It is based in the measurement of voltage and the adjustment of the load in order to ensure an even charge level across all cells.

Finally, the BQ27530YZFR-G1 also provides temperature sensing at the cell level. This is achieved using an external NTC thermistor connected to the chip, which provides an accurate measurement of the temperature of each cell in the pack. This is important as most of the cell chemistry are strongly dependent on temperature and can thus be accurately regulated by this chip.

In summary, the BQ27530YZFR-G1 is a unique integrated single-chip fuel gauge IC specifically designed for PMICs used in battery management. Through its accurate measurements and the resimulation of fuel gauging techniques, it is able to precisely monitor battery discharge and charge parameters as well as cell balancing and battery temperature.

The specific data is subject to PDF, and the above content is for reference