BSR15 Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A BSR15 is a type of bipolar junction transistor (BJT), more commonly known as a single transistor, one of the most widely used types of transistors. A single transistor is defined as having three connections, called the base, collector, and emitter, and four operating regions called cut-off, active, saturation, and reverse active.

BSR15 transistors are field effect transistors typically used in analog circuits. They are designed to amplify electrical signals, and are most commonly used in pre-amplifiers, amplifiers and power supplies, but can also be used in other applications.

BSR15 transistors operate using a principle called current gain. This is based on the transistor’s ability to convert a small current at its base connection into a larger current at its collector connection. The base-to-collector current gain is expressed as the current amplification factorbeta (β) and is calculated using the following formula:

β = Collector Current (Ic) / Base Current (Ib)

The current gain of a particular BSR15 transistor determines its operating characteristics and can range from 1 to 10,000 depending on the device. Higher current gain transistors are used for higher performance applications whereas lower current gain transistors are typically used in simpler applications.

The application field of BSR15 transistors ranges from analogue and digital circuits to power amplifiers. In audio amplifiers (pre-amps, power amps, etc), they are typically used as the main driving transistors and in analogue switches. In low-end consumer electronics (MP3 players, DVD players, etc), they are often used as power transistors due to their high current gain and relatively low cost.

In digital circuits, BSR15 transistors are commonly used as logic transistors. This is because their low base current requirements and low on-state voltage drops make them ideal for circuit designs that require fast switching times and high power efficiency. They are also often used as diode and LED drivers, as a wide range of current gains can be obtained to match the requirements of the application.

In power amplifiers, BSR15 transistors are usually chosen for their ability to produce large amounts of power (watts), as they can dissipate higher voltages and currents than standard transistors. This makes them ideally suited for power amplifiers that require high output voltages or currents.

In summary, BSR15 is a type of single transistor that is widely used for various applications. Its current gain determines its operating characteristics, which range from 1 to 10,000 and the application field of BSR15 transistors ranges from analogue and digital circuits to power amplifiers.

The specific data is subject to PDF, and the above content is for reference