Allicdata Part #: | BTMM-105-01-T-D-ND |
Manufacturer Part#: |
BTMM-105-01-T-D |
Price: | $ 0.65 |
Product Category: | Connectors, Interconnects |
Manufacturer: | Samtec Inc. |
Short Description: | .020 SQ. RA POST ASSEMBLY |
More Detail: | Position Shunt Connector |
DataSheet: | BTMM-105-01-T-D Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 0.59220 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
BTMM-105-01-T-D is a shunt or jumper used primarily in electrical circuits. A shunt is a type of electrical component, usually a resistor, that is used to bypass, or ‘shunt’, a current around the intended circuit, leaving the main circuit path and the intended components unaffected. The shunt can either be used as a parallel circuit, forming an alternative path for the current to flow, or it can be placed in series with one of the components to create a ‘dropper’ circuit, allowing the current to be ‘dropped’ out of the main circuit path.
Jumpers, meanwhile, are used to electrically connect two or more points in a circuit. Jumpers are usually used in circuits to remove a component from the overall circuit or to transfer a signal or power from one part of the circuit to another. Unlike a shunt, they do not create an alternate path for the current; rather, they are used to bridge two or more existing circuit paths.
The BTMM-105-01-T-D shunt/jumper has a wide range of applications. It can be used as a stand-alone device to divert current away from its intended destination, or it can be placed in series with other components in a new circuit to create a dropper circuit. It can also be used as a jumper to connect two or more existing circuit paths. It is most commonly used as an alternative current source in electronic switches, relay systems, and amplifiers. The BTMM-105-01-T-D has a very low voltage drop; this means that its current capacity is very high, making it ideal for applications requiring very high current loads.
The BTMM-105-01-T-D works by placing two resistors in series with each other. This creates an ‘open loop’ configuration, which allows for the current to be shunted or dropped from the main circuit path. The configuration also creates a voltage divider, which reduces the voltage across the two resistors. This is useful in applications where the current must be limited, such as in the case of an amplifier.
The BTMM-105-01-T-D is a versatile and reliable shunt/jumper, and it has many applications. It is often used in power supplies, electronic switches, relay systems, amplifiers, and other circuits, where its superior current capacity makes it ideal. In addition, its low voltage drop ensures that the current being diverted away from the main circuit is not too great, protecting the overall integrity of the circuit.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
BTMM-104-01-T-S | Samtec Inc. | 0.34 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-111-01-T-S | Samtec Inc. | 0.85 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-115-01-T-D | Samtec Inc. | 1.83 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-136-01-T-D | Samtec Inc. | 4.08 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-101-01-T-S | Samtec Inc. | 0.13 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-101-01-T-D | Samtec Inc. | 0.18 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-102-01-T-S | Samtec Inc. | 0.2 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-103-01-T-S | Samtec Inc. | 0.29 $ | 1000 | CONN HEADER 3POS SNGL 2MM... |
BTMM-102-01-T-D | Samtec Inc. | 0.34 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-102-01-T-S-002 | Samtec Inc. | 0.41 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-105-01-T-S | Samtec Inc. | 0.41 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-103-01-T-D | Samtec Inc. | 0.43 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-106-01-T-S | Samtec Inc. | 0.5 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-104-01-T-S-003 | Samtec Inc. | 0.53 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-104-01-T-D | Samtec Inc. | 0.53 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-107-01-T-S | Samtec Inc. | 0.54 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-102-01-G-D | Samtec Inc. | 0.54 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-104-01-G-S | Samtec Inc. | 0.57 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-105-01-T-S-003 | Samtec Inc. | 0.6 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-108-01-T-S | Samtec Inc. | 0.61 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-105-01-T-D | Samtec Inc. | 0.65 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-110-01-T-S | Samtec Inc. | 0.76 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-106-01-T-D | Samtec Inc. | 0.78 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-106-01-G-S | Samtec Inc. | 0.85 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-107-01-T-D | Samtec Inc. | 0.91 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-112-01-T-S | Samtec Inc. | 0.92 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-108-01-T-D | Samtec Inc. | 0.97 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-104-01-G-D | Samtec Inc. | 0.98 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-114-01-T-S | Samtec Inc. | 0.99 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-106-01-T-D-002 | Samtec Inc. | 0.99 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-107-01-G-S | Samtec Inc. | 0.99 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-107-01-T-D-001 | Samtec Inc. | 1.04 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-115-01-T-S | Samtec Inc. | 1.06 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-109-01-T-D | Samtec Inc. | 1.09 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-110-01-T-D | Samtec Inc. | 1.2 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-118-01-T-S | Samtec Inc. | 1.27 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-111-01-T-D | Samtec Inc. | 1.33 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-110-01-T-D-010 | Samtec Inc. | 1.41 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-120-01-T-S | Samtec Inc. | 1.41 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
BTMM-112-01-T-D | Samtec Inc. | 1.46 $ | 1000 | .020 SQ. RA POST ASSEMBLY... |
SHORTING LINK 1MM2 (1 x 2) Position Shun...
1MM SHORTING LINK2 (1 x 2) Position Shun...
JUMPER W-GRIP TEST SLOT .1" TIN2 (1 x 2)...
SHUNT 2MM STD PROFILE .177" GOLD2 (1 x 2...
.020 SQ. RA POST ASSEMBLYPosition Shunt ...
.020 SQ. RA POST ASSEMBLYPosition Shunt ...