BTMM-112-01-T-S

Shunts and jumpers are used in a variety of applications, in a wide range of environments, to provide current and voltage measurement solutions. The BTMM-112-01-T-S is a shunt/jumper combination, specifically designed to provide accurate current performances and safety, in applications where space is a premium.

The BTMM-112-01-T-S provides a bridge between two rails or two electrical circuits, allowing current to flow from one to the other. It is designed to be used in industrial and automotive applications, where a current or voltage path might otherwise be blocked.

The BTMM-112-01-T-S consists of a metal bridge, connected to two separate terminals. The bridge is made from a high-quality, high-temperature thermoplastic, providing excellent insulation and mechanical strength. At the terminals, two gold-plated, screw-fitted connectors ensure a reliable connection, and provide an accurate current measurement. The bridge is also connected to two separate shunt resistors, allowing the current to be accurately measured.

The two shunt resistors in the BTMM-112-01-T-S are designed to provide accurate current readings. The resistors work by creating a voltage drop across the bridge, which is then measured by a device, known as a multimeter. By measuring the amount of voltage drop across the bridge, the current flowing through the bridge can be calculated. This is done by using Ohm’s Law, which states that the voltage drop is proportional to the current.

The BTMM-112-01-T-S can also be used to provide a current or voltage path for a circuit. Instead of running a wire between two points, the BTMM-112-01-T-S can be placed in between them, allowing the current or voltage to travel through it instead. This is especially useful in applications where space is limited, or in applications where it is not possible to run a wire between the two points. For example, if an external device needs to be powered off of a circuit, the BTMM-112-01-T-S can be used to create a path for the current or voltage, without the need for extra wiring.

The BTMM-112-01-T-S is designed to be easy to install and use. The two terminals are designed so that they can be connected to two different circuits, or two different points, with ease. In addition, the cable connected to the bridge is flexible, making it easy to place the shunt/jumper combination in any position that is required.

The BTMM-112-01-T-S is a reliable and versatile current and voltage measurement solution, designed for a variety of industrial and automotive applications. It provides an accurate current measurement, and can provide a current or voltage path for a circuit, making it a great choice for applications where space is limited.