BUF634P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BUF634P Application Field and Working Principle

The BUF634P is a low-power, low-power electrometer amplifier which is primarily used in the field of linear amplifiers and instrumentation. It is a single-ended op-amp with an open-loop gain of 800 and a single-sided, 6 dB gain-bandwidth product. Its output voltage range is ±12V and its input voltage range is ±10V. Its open-loop output impedance is 0.3 ohms.

Input/Output Characteristics

The BUF634P has an input voltage range of ±10V and an input impedance of 1000 ohms. Its output voltage range is ±12V and its open-loop output impedance is 0.3 ohms. The amplifier can be powered by a single supply from 2.2V to 10V and the output will remain within ±1V even when the supply voltage is varied. The amplifier has a low input bias current of 0.2 pA and an input offset voltage of 5mV. The minimum supply current for the amplifier is only 25uA.

Gain Bandwidth Product

The BUF634P has a single-sided, 6 dB gain-bandwidth product of 8MHz. This is 8 times the frequency of the largest signal that can be amplified by the device. This allows the device to amplify signals of up to 8MHz. The device also has a high slew rate of 3V/μs, making it suitable for high-frequency applications.

Differential Input Stage

The BUF634P has a differential input stage, meaning that it can be used to measure signals from two different sources. This makes it suitable for use in audio or video applications. The device also has a low-crosstalk, making it suitable for high-performance applications.

Applications

The BUF634P is a versatile amplifier that can be used in a variety of applications. It is suitable for use in high-performance linear amplifier and instrumentation applications. It is also suitable for use in audio, video, and communication applications.

Working Principle

The BUF634P works by converting a differential input signal into an output signal of equal amplitude, but of opposite polarity. This is done by using an input differential stage which amplifies a differential input signal and applies an inverse gain to the result. The output voltage of the differential stage is then amplified by an amplifier stage, which is composed of an op-amp, feedback resistors, and an output stage. The result is an output signal of equal amplitude but of opposite polarity.

Conclusion

The BUF634P is a low-power, low-power electrometer amplifier which is primarily used in the field of linear amplifiers and instrumentation. It has a single-sided, 6 dB gain-bandwidth product of 8MHz, a low-input bias current of 0.2 pA, and an input offset voltage of 5mV. Its differential input stage makes it suitable for audio, video and communication applications. The BUF634P works by converting a differential input signal into an output signal of equal amplitude but of opposite polarity.

The specific data is subject to PDF, and the above content is for reference