BYVB32-200-E3/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BYVB32-200-E3/45 Application Field and Working Principle

The BYVB32-200-E3/45 is a diode-rectifier array with a variety of uses. It is classified as a three-phase bridge rectifier and has three-phase windings and four rectifier diodes. As a single-phase array, it has two-phase windings and two rectifier diodes. This makes it suitable for a wide range of applications, from power supplies to rectifier circuits.

A three-phase bridge rectifier is used to convert the incoming AC power from three-phase power sources like motor windings, alternators and so on to DC power for use in downstream components and circuits. It also provides reverse polarity protection since the rectifier diodes are connected in opposite polarities and only allow current to flow in one direction. This eliminates the risk of over-voltage and back-EMF, thus protecting the circuitry.

The BYVB32-200-E3/45 is a self-contained bridge rectifier which consists of four rectifier diodes arranged in a bridge configuration. It has a peak reverse (blocking) voltage of 200V and an operating temperature range of -40°C to +125°C. The junction capacitances of the diodes are minimized after smoothing, which helps reduce power dissipation and improves efficiency.

The BYVB32-200-E3/45 rectifier array has a variety of uses. It can be used in the assembly of power supplies, rectifier circuits, motor drives and other applications that require rectification from multiphase power sources. It is also used in the production of DC power for AC induction motors, air conditioning, and other motor control applications. Additionally, it can be used in the design of power converters, inverters and other power conversion and control applications.

In order to operate properly, the BYVB32-200-E3/45 requires correct wiring. The diode should be connected in series with the AC power source, with each diode connected in opposing polarities. This ensures that the current will only flow in one direction and provides reverse polarity protection from over-voltage and back-EMF. The rectified output voltage is determined by the voltage rating of the individual diodes and will be lower than the peak of the AC input voltages.

The BYVB32-200-E3/45 bridge rectifier is ideal for use in the assembly of power supplies, rectifier circuits, motor drives and other applications that require rectification from independent three-phase or dual-phase power sources. It can also be used in the production of DC power for AC induction motors, air conditioning, and other motor control applications. Additionally, it is suitable for the design of power converters, inverters and other power conversion and control applications.

The specific data is subject to PDF, and the above content is for reference