BZD17C62P RHG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BZD17C62P RHG Diode is a popular choice in general electronic applications. It is a Zener type, single diode with a PN junction. It is designed to protect electrical circuits from unwanted overvoltage conditions. It is designed to quickly and accurately set a specific operating voltage, and then tightly control that specific operating voltage over time, even with fluctuations in input voltage.

The BZD17C62P RHG has an operating voltage of 6.2V and a total power dissipation of up to 200mW. It is offered in a SOD-323 surface mount package, which has a small size and low power consumption, and is designed to be easy to mount and connect to other components. It has a relatively low operating temperature range of -40 to +150 Celsius, and its maximum operating frequency is 50kHz.

The BZD17C62P RHG is suitable for a variety of applications, such as protection circuits, power supplies, logic circuits and other general purpose circuits. It can be used in both linear and switching mode power supplies, and is particularly suited for applications where large, transient voltage spikes can occur. It can also be used in high power current limiting circuits and voltage clamping setups.

The working principle of the BZD17C62P RHG Diode is based on Zener breakdown action. When a reverse-biased voltage is applied to the diode, the electric field will increase and will eventually reach a point where electrons in the PN junction are forced to break free from their bonds and cross the junction. These free electrons then generate a current and the diode will conduct. The voltage at which this breakdown occurs is known as the Zener Voltage, and this is the value which the BZD17C62P RHG is designed to tightly control over time.

In order to ensure accurate and long-term voltage regulation, the primary design parameter on the BZD17C62P RHG is the breakdown voltage, which is set to 6.2V. This breakdown voltage value is measured and verified through surface-mount technology process, which is a specialized process to guarantee reliable and accurate performance.

The BZD17C62P RHG Diode can also be used in a Zener Clamping circuit. A Zener Clamping circuit is typically used to protect a circuit from over voltages. This can be done either by clamping the voltage to a specific voltage level, which will be determined by the selection of the used diodes, or by diverting the current to a series of protective diodes which will protect the device from the over voltages.

In summary, the BZD17C62P RHG Diode is a Zener type, single diode with a PN junction. It is designed to protect electrical circuits from overvoltage conditions and tightly control the operating voltage over time. It is also suitable for a variety of applications, such as protection circuits, power supplies, logic circuits, and current limiting/voltage clamping circuits. It has an operating voltage of 6.2V and a total power dissipation of up to 200mW. It is offered in a SOD-323 surface mount package, which is designed to be easy to mount and connect to other components.

The specific data is subject to PDF, and the above content is for reference