BZX55B15-TAP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A BZX55B15-TAP is a single Zener diode with a power rating of 1.5 W. It can be used in a wide range of applications, from consumer electronics to automotive electronics. It is designed to be used in a regulated load, such as a battery, to provide voltage regulation and over-voltage protection.

The BZX55B15-TAP is often used as a protection device for sensitive electronics, such as cell phones and computers. In these applications, the diode will regulate the voltage between the load and the power source to protect the electronics from excess voltages. In addition, the diode can also be used to regulate a voltage to a known level or to provide over-voltage protection on a voltage line.

The diode is composed of two layers of semiconductor material, which are separated by a thin junction. This junction is called the Zener barrier. When a voltage is applied to the diode, electrons will flow across the Zener barrier and provide a regulated output voltage. The amount of current that is allowed to flow across the barrier is determined by the breakdown voltage of the diode, which is marked on its data sheet.

When the diode is connected in a circuit, current will flow through the diode in one direction only. This is known as its forward bias. When the forward bias voltage exceeds the Zener barrier voltage, a reverse current will begin to flow, which is limited by the Zener barrier. This is called the Zener breakdown voltage. Once the reverse current reaches a certain level, the diode will be able to regulate the voltage to the desired level.

The BZX55B15-TAP has a breakdown voltage of 15V, which makes it well suited for use in regulated power supplies and applications that require over-voltage protection. It is also used in many consumer electronic products, such as cell phones and computer displays, where a stable voltage is required in order to display properly.

When using the BZX55B15-TAP, it is important to ensure that the breakdown voltage is not exceeded, as this can cause permanent damage to the diode. Additionally, it is important to ensure that the current is kept within the diode’s power rating of 1.5 W, as higher currents can cause thermal damage to the diode.

In summary, the BZX55B15-TAP is a single Zener diode with a breakdown voltage of 15V and a power rating of 1.5 W. It is used in applications requiring voltage regulation or over-voltage protection. It is important to keep the current within the diode’s power rating and to not exceed the breakdown voltage to prevent damage or failure of the diode.

The specific data is subject to PDF, and the above content is for reference