C10M20

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

C10M20 electrical specialty fuses are designed for many applications, including industrial and commercial applications. They provide overload and short circuit protection for circuits carrying up to 600 volts. They are available in different sizes and current ratings, ranging from 0.5 amps to 20 amps.

These fuses provide reliable over-current protection along with superior arc-suppression technology. Their main purpose is to protect the circuits, components, and people from the effects of an electrical over-current fault event. In the event of an electrical over-current fault, these fuses will quickly open and interrupt the circuit. This helps to reduce the amount of damage and damage-causing energy released by the over-current.

C10M20 electrical specialty fuses work by melting a special alloy, which is usually made of a combination of tin, lead, and zinc. When the current flowing through the fuse reaches its rated value, the resistance of the alloy increases, causing it to form a thin layer of resistive material that acts as an electrical insulator. By heating and melting this thin layer of resistive material, the fuse opens the electrical circuit, thus preventing further damage.

C10M20 electrical specialty fuses require a special fuse holder for proper installation. The holder must be firmly attached to the circuit and connected to the ground connection. This will help ensure the fuse is securely fastened in place and cannot be easily removed. The holder must also be compatible with the fuse type, size, and current ratings of the fuse.

When using C10M20 electrical specialty fuses, it is important to consider the type of fuse needed, as well as the size, current rating, and type of application. The fuse type and current rating should correspond to the wiring diagram or the fuse specification sheet. The size and type of the application depend on the characteristics of the circuit, such as the number of wires, type of voltage, and nature of the load.

To correctly install C10M20 electrical specialty fuses, follow the manufacturer’s instructions. Be sure to check the fuse type and current rating and properly mount the fuse holder. To ensure safety, use a fuse puller when servicing the fuses, as well as professional wiring and qualified personnel. Be sure to test and inspect the electric connections before and after the installation of the fuse.

C10M20 electrical specialty fuses are reliable for use in many different applications. They ensure protection against overload and short circuit conditions which can cause expensive damage to the circuits, components, and personnel. By understanding the working principle and the different types and applications of C10M20 electrical specialty fuses, a safe and reliable installation can be achieved.

The specific data is subject to PDF, and the above content is for reference