C184N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

The silicon control rectifier (SCR) is a solid-state four-layer device that allows the current to flow in one direction, but not in the opposite direction. It is capable of controlling larger current and voltage than a transistor and is widely used in power control applications. The SCR is essentially a bidirectional trigger switch, which can switch higher voltages with just small signal currents. In other words, when a current is applied to the gate terminal, it turns on and allows the load to be powered. The current flow can be adjusted by varying the signal current to the gate terminal.

A C184N SCR, also known as a 4-layer diode, is a four-antiparallel diode configuration and is generally used in control circuits. This device is used for a variety of applications, such as temperature control systems, motor control systems, and AC power control systems. It has the added advantage of being able to handle high voltage applications. C184N SCRs are also used in industrial automation, communications, and audio systems.

The C184N SCR consists of two p-n-p-n layers, with each layer consisting of two p-n junctions. One layer is connected to the anode and cathode, while the other is connected to the gate. The p-n-p-n structure of the device allows it to be operated in two distinct modes. In the direct current (DC) mode, the SCR acts as an open circuit until a signal current is applied to the gate, at which point it closes and allows the current to flow. In the alternating current (AC) mode, the SCR does not open or close, but instead limits the current flow through it to a predetermined level, depending on the amount of signaling current applied to the gate.

The C184N SCR is used in a variety of ways. In motor control applications, the SCR is used to control the speed and torque of the motor by varying the current applied to the gate terminal. It is also used in temperature control systems, where it is used to regulate the current in relation to the temperature. It is also used in AC power control applications, where it is used to control the power output of the AC source.

The working principle of C184N SCRs is quite straightforward. When the gate is connected to the source of control current, the SCR is activated and enables current to flow through it. The current through the device is proportional to the magnitude of the control current. The current through the device can be adjusted by changing the magnitude of the control current applied to the gate.

In summary, the C184N SCR is a four-layer diode used for a variety of power control applications. It is capable of controlling large current and voltage, and is used in a variety of industrial, communications, and audio systems. It works by allowing current to flow through it in one direction when a signal current is applied to its gate terminal. The current through the device can be adjusted by varying the signal current to the gate.

The specific data is subject to PDF, and the above content is for reference