C3390-50.000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical components that produce repetitive pulses of AC current or alternating waves of AC voltage. The C3390-50.000 oscillator is a voltage-controlled oscillator (VCO) that is designed for automated test equipment (ATE) applications. It is capable of providing accurate, high-frequency signals with a frequency range of 50MHz to 960MHz. The C3390-50.000 oscillator is mainly used in high-frequency switching power supplies, frequency synthesizers, signal generators, and ATE systems.

The operating principle of the C3390-50.000 oscillator is based on the concept of negative resistance. In this type of oscillator, extra external loads are connected to the input or output stages of the circuit. This increases the internal impedance of the circuit, causing the current to decrease as the frequency increases. As the current decreases, the voltage across the device rises, providing negative resistance. This reverses the direction of the current flow, creating an alternating current in the form of a sine wave. The resulting sine wave is then fed back to the input stage, where it is amplified and filtered to produce the desired frequency.

The C3390-50.000 oscillator also features a voltage-controlled oscillator (VCO) circuit, which is designed to produce accurate frequencies over a wide range. The voltage applied to the VCO is used to adjust the frequency of the oscillator. The VCO circuit is adjustable, allowing users to adjust the frequency of the oscillator without having to make changes to the physical components of the circuit. The C3390-50.000 oscillator also includes a phase-lock loop (PLL) circuit, which is used to maintain a precise frequency. The PLL is adjustable so that users can fine-tune the frequency of the oscillator.

The C3390-50.000 oscillator is primarily used in ATE applications. It is capable of providing accurate and high-frequency signals with a frequency range of 50MHz to 960MHz. In ATE systems, the C3390-50.000 oscillator is used to simulate signals such as clocks, data signals, and trigger pulses. The oscillator can also be used in frequency synthesizers, signal generators, and high-frequency switching power supplies.

The C3390-50.000 oscillator is a reliable and accurate voltage-controlled oscillator, designed for use in ATE applications. It features a negative resistance design, which allows for precise frequency control. The VCO and PLL circuits are adjustable, allowing for fine-tuning of the frequency. The C3390-50.000 oscillator is capable of providing accurate frequency signals with a frequency range of 50MHz to 960MHz, making it ideal for use in ATE systems, frequency synthesizers, and signal generators.

The specific data is subject to PDF, and the above content is for reference