Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic circuit that produces an output signal which is used to regulate timing and frequency requirements of other parts of the design. The most common type of oscillator is a sine wave generator, but other designs such as pulse and square wave oscillators are also available. Oscillators are used in numerous applications, from powering electronic timers to filtering and modulating signals. The type of oscillator used can be determined by the type of output signal it produces and the frequency range it operates in.

C3391-6.176 Application Field and Working Principle

The C3391-6.176 is a monolithic, wideband CMOS (Complementary Metal Oxide Semiconductor) oscillator designed and manufactured by Maxim Integrated Products. This oscillator is used in a wide variety of applications, including audio frequency (AF) and video frequency (VF) mixing and matching, timing and communications.

The C3391-6.176 offers ultralow power consumption and features fixed frequencies of 8 MHz to 50 MHz, low phase noise of -115 dBc/Hz at 1.0 MHz offset from the center frequency, and programmable duty cycles of 50 percent to 90 percent. This oscillator features a single-ended output square wave, with a maximum supply voltage of 5.5 V. It also has an internal pull-down switch and is packaged in a miniature 8-pin SOIC (Small Outline Integrated Circuit) to provide a compact solution for space-constrained applications.

The C3391-6.176 oscillator is an ideal solution for powering microcontrollers, microprocessors and digital logic designs. It is also great for video signal processing, data communications, and RF switching. The C3391-6.176 operates over a wide temperature range of -40°C to +85°C, allowing it to handle a variety of difficult applications.

The C3391-6.176 oscillator works by generating an alternating current (AC) signal. The current flows from the oscillator\'s amplifying transistor, through the capacitor and the output circuit, and back to the transistor\'s base, where it is filtered and isolated from the power supply. This repeating loop generates oscillations at the selected frequency, within the range of 8 MHz to 50 MHz.

The internal pull-down switch turns off the oscillator when power is applied, allowing for the device to go into power-down mode. This feature can help to provide an energy-efficient design, as the device only consumes a very low level of power when it is not in use.

The C3391-6.176 is a reliable and efficient oscillator that is ideal for use in small-sized embedded systems. The device is easy to use and provides accurate performance for a wide variety of applications. It is capable of operating in a wide temperature range, making it suitable for use in extreme environments.

The specific data is subject to PDF, and the above content is for reference