C388M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are a type of semiconductor switching device, commonly used in switches, rectifiers, voltage regulators, motor controllers, inverters and other applications. A Thyristor is typically a four-layer device, consisting of a PNPN structure, with two junctions formed by alternately connected P and N-type materials. The Thyristor is usually triggered by a gate pulse applied to its Gate terminal, and turns on when the voltage at its Anode terminal is greater than its Gate voltage. There are two types of Thyristors, Silicon-Controlled Rectifier (SCR) and the Triac. The Silicon-Controlled Rectifier (SCR) is a unidirectional semiconductor switching device able to control the flow of electric current in a single direction. The C388M is a type of SCR device, primarily used for controlling AC circuits with high voltages and currents, up to 600 volts.

The working principle of the C388M SCR is based on the principle of operation of the Thyristor, as described above. When a gate pulse is applied to the Gate terminal, electron current begins to flow from the Anode to the Cathode. This current continues until the Anode current reaches its holding current, set by the device manufacturer, usually some small fraction of the device rating. Due to the high forward voltage drop of the device, the voltage applied to the device is reduced, preventing overvoltage and overcurrent conditions. Once the Anode current drops below the holding current, the Gate current turns off and the device ceases conducting.

The C388M application field is wide and varied, and is primarily used to control large, high voltage AC circuits. One example application is electric motor control, where the C388M can be used to turn a motor on or off. Another example is voltage regulation, where the C388M can be used to regulate the voltage in a circuit by turning the device on and off in rapid succession. The C388M can also be used in switching applications, where the device can be used to switch large currents and high voltages with minimal losses.

The C388M SCR is a useful device in a variety of application, and can be used to control large AC circuits with high voltages and current. Although the device is often used in power control, voltage regulation and switching applications, it can also be used in other types of applications such as motor control, lighting control and various other circuit applications.

The specific data is subject to PDF, and the above content is for reference