C390M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are electrical devices that can be used to regulate or control electronical or digital current. The most common type of the thyristor is the SCR or Silicon Controlled Rectifier. The SCR is an non-isolated power semiconductor device that can control high voltage and current switching applications.

The C390M is a silicon Controlled Rectifier (SCR) specifically designed for high current, low voltage applications. It is used in power switching applications as a switch and is designed to control the power supply of electronic equipment, such as stepper motors, solenoids, and other types of actuators.

The C390M is a 4-pin device, with a common anode, a gate terminal, and a cathode. It is designed to be mounted in a sensing diode package and is rated for peak reverse voltage of 5.25V, continuous forward current of 30A, peak forward current of 150A, and a surge forward current of 350A at a temperature of 55° C.

In addition to its use in power switching applications, the C390M is also used in actuator control in computer-controlled systems, such as robotic systems. It can be used to turn on and off power to individual motors or devices, or to control the speed. It is also used in switch-mode power supply applications.

The working principle of the C390M is based on the SCR concept. An SCR is a four layer device consisting of an anode, a gate and two cathodes. When a gate signal is applied to the gate terminal, the SCR is turned on and the flow of electrical current between the anode and cathode is allowed. When the gate signal is removed, the SCR turns off and the current stops.

The C390M is designed to be used in applications in which high current flows. It is designed to be able to handle reverse voltages up to 5.25 V, continuous forward current of 30A, and surge forward current of 350A. It also has a peak load current of 150A at a temperature of 55°C. The gate terminal is designed to have a low gate voltage of 4V, and a gate current of 5mA.

The C390M is designed for use in high current applications such as motor control, power supply applications, and switch-mode power supplies. It can be used to turn devices on and off, or to control the speed of motors. It is designed to handle reverse voltages up to 5.25V, and its rated current and surge current enable it to be used in a variety of applications. It is also designed to be able to handle peak load current of 150A.

The specific data is subject to PDF, and the above content is for reference