Allicdata Part #: | C394D-ND |
Manufacturer Part#: |
C394D |
Price: | $ 72.75 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Powerex Inc. |
Short Description: | THYRISTOR INV 410A 400V TO-200AC |
More Detail: | SCR Standard Recovery |
DataSheet: | C394D Datasheet/PDF |
Quantity: | 1000 |
30 +: | $ 66.13550 |
Series: | -- |
Packaging: | -- |
Part Status: | Active |
Current - Non Rep. Surge 50, 60Hz (Itsm): | -- |
SCR Type: | Standard Recovery |
Operating Temperature: | -- |
Mounting Type: | -- |
Package / Case: | -- |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Thyristors - SCRs
C394D is a type of semi-conducting controlled rectifiers (SCR), also known as thyristors. It is a three terminal semiconductor device that can be used to control electrical currents and provide trigger pulses. It acts as a switch and is capable of switching large currents in an efficient manner. C394D is mainly used in a wide range of applications, such as AC motor control, electronic ballast control, lighting dimmers, and power control.
Working Principle
The SCR is a four-layer semiconductor device that is made up of two back-to-back p-n junctions. It has three terminals, an anode, a cathode and a gate. The anode and the cathode are connected to the positive and negative terminals of the power supply, respectively. The C394D operates by allowing the current to flow from its anode to the cathode when the voltage applied to its gate is higher than the anode-cathode voltage.
To turn the SCR off, the gate can either be shorted to the cathode or left open. If the gate is shorted to the cathode, the bias current on the gate-cathode junction will reduce to zero and the SCR will be turned off. If the gate is left open, no current will enter the gate and the SCR will remain off.
Application Field
C394D is mainly used in applications such as motor control, power control, electronic ballast control, lighting dimmers and AC motor control. In AC motor control, the SCR can be used to control the speed and direction of a motor. It is used to control the current and provide a trigger pulse to start and stop the motor.
In power control, the SCR is used to switch large currents in an efficient manner. It is used to control the current in the circuit and switch heavy loads. The SCR can also be used in electronic ballast control, which is used to control the brightness of lamps. The SCR can be used to dim the lights or turn them off according to the requirements.
The C394D can also be used in lighting dimmers. The SCR can be used to dim the lights or increase their brightness according to the requirements. It can be used to switch light bulbs on and off quickly and efficiently.
Overall, the C394D is a very versatile and efficient semi-conducting controlled rectifier. It is used in many applications, such as motor control, power control, electronic ballast control, lighting dimmers and AC motor control. It is capable of switching large currents in an efficient manner.
The specific data is subject to PDF, and the above content is for reference
THYRISTOR 600V 12A TO220SCR 600V 18.8A S...
NCR100W-10L/SC-73/REEL 7" Q1/TSCR 850V 1...
SCR SENS 800V 800MA TO92-3SCR 800V 800mA...
THYRISTOR 200V 0.8A SOT54SCR 200V 800mA ...
THYRISTOR 600V 8A TO220SCR 600V 12.6A St...
THYRISTOR 600V 6A TO220SCR 600V 9.4A Sta...