C430ALBG2 Optoelectronics

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Panel Indicators, Pilot Lights and the C430ALBG2 are all components used in the assembly of electrical control systems. The C430ALBG2 is an inherently-lighted indicator that is specifically designed for use in crowded control panels with limited space. It provides a visual indication of the status of the circuit it is monitoring without the need for an external power source.

The C430ALBG2 is a lightweight indicator made from plastic, which reduces the amount of heat generated when the indicator is in use. It features two distinct operating modes. The first is the steady-on function, in which the indicator lights up when the power is switched on and remains lit until the power is turned off. This mode can be used to simply indicate that the system is turned on. The second mode is the blinking-type indicator, which oscillates between two intensities (bright/dark) to show that a signal has been detected or a system is in process.

In order to work effectively, the C430ALBG2 must first be connected to a power source. This can be done through either a direct or indirect connection. If the system is being connected directly, then the power source will need to be connected directly to the indicator. This is done by attaching the power lead to the terminal block located at the back panel of the indicator. The amount of power needed for the light to operate can then be adjusted by turning the potentiometer on the side of the terminal block.

If the system is to be connected indirectly, then a 12V DC relay will need to be used to provide the power to the indicator. The relay connects the power from the terminal block to the indicator, allowing the light to start flashing. The frequency of the flashing can then be adjusted by adjusting the output from the relay.

As well as being used as a simple indicator, the C430ALBG2 can be used in a variety of applications. It can be used as a warning light or an emergency indicator, to show the presence of a danger or to indicate that a critical system is in process. It can also be used in motor control circuits to show the current position of a motor or to indicate the success of a machinery cycle. In addition, it can be used in the monitoring of alarms and temperature controllers.

The C430ALBG2 is an invaluable component in electrical control systems, due to its versatility and easy installation. Its two operating modes provide a simple yet effective means of communicating the status of a system to its user. By making use of its LED light source and advanced design, it is one of the most reliable indicators available in the market today.

The specific data is subject to PDF, and the above content is for reference