Allicdata Part #: | C49B10X2-ND |
Manufacturer Part#: |
C49B10X2 |
Price: | $ 52.48 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Powerex Inc. |
Short Description: | THYRISTOR INV 70A 200V TO-83 |
More Detail: | SCR Standard Recovery |
DataSheet: | C49B10X2 Datasheet/PDF |
Quantity: | 1000 |
30 +: | $ 47.71160 |
Series: | -- |
Packaging: | -- |
Part Status: | Active |
Current - Non Rep. Surge 50, 60Hz (Itsm): | -- |
SCR Type: | Standard Recovery |
Operating Temperature: | -- |
Mounting Type: | -- |
Package / Case: | -- |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Thyristors – SCRs (semiconductor controlled rectifiers) – are a type of semiconductor device that is widely used in power electronics applications, such as DC to AC power conversion, switching power supplies and AC motor control. The C49B10X2 is a type of three-quadrant SCR that is frequently used in various applications. This article will discuss the application field and working principle of the C49B10X2.
Application Field of C49B10X2 SCR
The C49B10X2 is a three-quadrant SCR that is widely used in various applications. It can be used for DC to DC power conversion, AC motor control, and high-power switching in car ignition systems, plasma cutting machines, HVAC systems, and many other industrial and consumer applications. The C49B10X2 SCR is particularly well-suited for charging and discharging high current loads such as batteries and capacitors. It is also commonly used as a high-current contactor in AC to DC power supplies.
The C49B10X2 also has a wide range of applications in renewable energy systems, solar and wind power systems, and other energy conversion systems. It can be used to control the flow of AC and DC power, as well as to regulate the output voltage and current in various renewable energy systems. In addition, the SCR can be used to switch DC circuit components, such as disconnect switches, fuses, and protection devices.
Working Principle of C49B10X2 SCR
The C49B10X2 is a three-quadrant SCR. This means that it has two active current-carrying terminals (anode and cathode) and two control terminals (gate and cathode). The device will turn on and conduct current when a gate voltage greater than the anode-to-cathode voltage (VAK) is applied to the gate terminal. The SCR can be turned off by reversing the anode-to-cathode voltage (VAK) or by applying a negative gate voltage to the gate terminal. This feature makes the SCR suitable for use in various applications where a high-current AC or DC switch is required.
The C49B10X2 also has a large blocking voltage range of up to 650 volts. This makes it suitable for use in applications that require high-voltage power control and high-power switching, such as in HVAC systems, car ignitions, and high-power switching circuits. The SCR also has a fast response time, which makes it suitable for applications that require rapid switching, such as in plasma cutting machines and motor control.
Conclusion
The C49B10X2 is a three-quadrant SCR that is widely used in various power electronics applications. Its fast response time and large blocking voltage range makes it suitable for applications that require high-power switching and high-voltage control. The SCR can also be used in various renewable energy applications to control the flow of AC and DC power, as well as to regulate the output voltage and current in various renewable energy systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
THYRISTOR 600V 12A TO220SCR 600V 18.8A S...
NCR100W-10L/SC-73/REEL 7" Q1/TSCR 850V 1...
SCR SENS 800V 800MA TO92-3SCR 800V 800mA...
THYRISTOR 200V 0.8A SOT54SCR 200V 800mA ...
THYRISTOR 600V 8A TO220SCR 600V 12.6A St...
THYRISTOR 600V 6A TO220SCR 600V 9.4A Sta...