C49C20

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors – SCRs

The C49C20 is a specific kind of thyristor, a type of silicon-controlled rectifier (SCR). Such SCRs are semiconductor devices that can be switched between off and on states and are used in various industrial applications requiring the control of electric current and electrical signals.

An SCR is a unidirectional device, which allows current to pass through it in only one direction, and requires a gate signal to trigger it in order to turn on. This gate signal is usually an AC voltage, and when a voltage is applied to the gate and it exceeds the required threshold for the SCR, the SCR switches on and closes the circuit. The SCR then allows the current to flow.

The specific model of thyristor, the C49C20, is a high-performance device. It is optimized for use with an alternating current at a frequency of 50–400 Hz and has a peak repetitive off-state voltage of 1200 V and a blocking capability of 20A. It operates with a typical trigger gate current of 1A and a reverse trigger current of 7 A, allowing for functioning of the same SCR over a range of parameters.

The C49C20 SCR is designed in such a way that once it switches to the on-state, it will stay in a latched state and can only be switched back to the off-state using an external gate signal. Due to this capability, it is a commonly used feature in power-control circuits, such as dimmers and motor control circuits, where a voltage needs to be regulated. In such applications, the SCR’s on-state current should flow uninterruptedly in order to provide a continuous signal.

Aside from these power-control applications, SCRs can also be used to control the flow of electricity in switching circuits. The C49C20 SCR, for instance, can be used as a switch in a lamp for a thermal circuit, allowing for the lamp to be switched on or off depending on the temperature. This type of application requires a higher voltage and power than other switching circuits, due to the operating temperature range.

The C49C20 thyristor also finds use in circuits that must measure the power flow and resistance of a device in order to detect overloads. These overloads can be triggered if the current exceeds a certain level, or if the resistance is below a certain threshold. The C49C20 thyristor is thus used in such applications, as it can detect an overload situation and then perform an appropriate action, such as switching off the device.

The C49C20 SCR is one of the most common types of thyristors, and it is used in a variety of applications. Its main feature is the ability to switch from an off-state to an on-state with an applied triggering signal, allowing for the use of this model in various industrial applications. The model can also be used as a switching circuit in power-control applications and as a protection device in overload detection. With its low power consumption and high-frequency performance, the C49C20 SCR is a popular choice for numerous power-related applications.

The specific data is subject to PDF, and the above content is for reference