C49D10X2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are components of semiconductor materials which are commonly used in modern electrical and electronic circuits for rectifying and regulating current. The most common type of thyristor is the Silicon Controlled Rectifier (SCR). The SCRs are two-terminal, three-layer semiconductor rectifying devices which can be used for both rectification as well as switching. The C49D10X2 is one such type of SCR that is used for providing a wide range of benefits such as increase in efficiency, improved service life and better reliability.

The C49D10X2 SCR utilizes a 4-layer silicon-based material design, making it suitable for a wide range of applications. The device has a very low forward voltage drop, high surge current capability and high off-state voltage, making it ideal for switching large currents across wide voltage differences. The device is also useful for controlling semiconductor devices such as LED arrays, DC motors and HVAC applications. The device is capable of providing excellent surge current protection, as well as temperature cycling operations.

C49D10X2 SCRs are designed to provide very good scalability for higher power ratings, higher voltage ratings and wider temperature range operation. The device is available in both through-hole and surface mount packages and has a wide range of accessories such as MOSFET and control boards, circuit patterns and test adapter kits which can be utilized for installation, testing and troubleshooting purposes.

The C49D10X2 SCR, in its standard form, employs two basic operational modes of operation. The two modes are called the ‘forward blocking’ and the ‘reverse blocking’ modes. The forward blocking mode restricts current flow until it exceeds critical levels, whereas the reverse blocking mode restricts current flow until it exceeds a certain threshold. Both these modes are employed to provide the device with high starting and holding times, as well as high surge currents which enable it to be used in a wide variety of high-power applications.

The operation of the C49D10X2 SCR relies on two main components; the anode and the cathode. The anode is the positive pole of the device, while the cathode is the negative pole. The anode is usually connected to the positive terminal of the power supply and the cathode is connected to the load. When a positive voltage is applied to the cathode and the anode, a current flows through the C49D10X2 SCR and the load. The current flow is regulated by the biasing of the device; the higher the applied voltage, the higher the current that the C49D10X2 can allow.

In order to typical SCR circuit, the trigger is applied to the gate to generate a voltage waveform and this waveform will determine the level of the current flow through the SCR. The current waveform is typically a sinusoidal waveform and this waveform will be screened by the C49D10X2 SCR, allowing only that half wave to be passed through the device. This will help reduce harmonics and ensure that the current waveform is optimized for the application.

The C49D10X2 SCR is suitable for use in a variety of applications such as motor controls, surge protection, motor starters, inverters, fault protection and UPS systems. The device has been used commercially in many applications and is a trusted and reliable component for industrial and commercial applications. The device is suitable for both AC and DC circuits. The C49D10X2 SCR is a robust and reliable device which is easy to install and operate and has been found to provide better performance and increased reliability.

The specific data is subject to PDF, and the above content is for reference