C49M10X2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A C49M10X2 is a Thyristor, specifically a Silicon Controlled Rectifier (SCR). It is a semi-conductor device that has three terminals, a terminal for gate control, a cathode, and an anode. It is often used in power control circuits, power switching devices, and rectification circuits. It is capable of both blocking and conducting current, depending on the voltage and current applied to the gate.

The working principle of a C49M10X2 is a voltage to current control, which is based on the diode design. When a voltage is applied to the anode, current flows through the device. If the voltage is increased, then the current will increase. This is due to the PN-junction of the diode, which is decreased in size as the voltage is increased. When the voltage applied to the anode reaches the breakdown voltage of the junction, a large current flows through the device. If a voltage is applied to the gate, it will\'\'turn on\'\' the device by reducing the breakdown voltage. If the voltage is reversed, it will stop the device from conducting. This is because the breakdown voltage is increased and current can no longer flow.

The C49M10X2 is often used in a variety of applications involving power control, especially for switching power devices. These include microwave ovens, electric motors, rectification systems, power supplies, and more. It can also be used for high power rectification and power factor correction, as well as its ability to reduce the harmonic distortion in these systems.

Another common application of the C49M10X2 is in thyristor phase control. This technology is used in a variety of systems, such as heaters, motor control, HVAC systems, lighting, and more. In this application, the C49M10X2 is used to act as a switch that can be turned on and off with a control signal. This enables efficient control of the device and increases efficiency.

Finally, the C49M10X2 is often used in low voltage lighting, such as LED lights and flexible LED strips. It is capable of controlling the brightness of the lighting, and has been found to be very efficient and effective in reducing energy usage.

In conclusion, the C49M10X2 is a Thyristor, specifically a Silicon Controlled Rectifier (SCR). It is a semi-conductor device that has three terminals, a terminal for gate control, a cathode, and an anode. It is capable of both blocking and conducting current, depending on the voltage and current applied to the gate. It is commonly used for switching power devices, high power rectification and power factor correction, as well as for thyristor phase control and low voltage lighting.

The specific data is subject to PDF, and the above content is for reference