Allicdata Part #: | C50EX500-ND |
Manufacturer Part#: |
C50EX500 |
Price: | $ 48.47 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Powerex Inc. |
Short Description: | THYRISTOR STUD 70A 500V TO-94 |
More Detail: | SCR Standard Recovery |
DataSheet: | C50EX500 Datasheet/PDF |
Quantity: | 1000 |
30 +: | $ 44.06510 |
Series: | -- |
Packaging: | -- |
Part Status: | Active |
Current - Non Rep. Surge 50, 60Hz (Itsm): | -- |
SCR Type: | Standard Recovery |
Operating Temperature: | -- |
Mounting Type: | -- |
Package / Case: | -- |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Thyristors – SCRs
C50EX500 is an SCR or silicon controlled rectifier with the gate control capabilities. The device is a member of the thyristor family, which falls under the category of a switching device that conducts current when it is triggered. It is used for different applications in AC and DC power control.
Applications
C50EX500 is used in a number of applications including in AC rectification, phase control, lamp dimmer, heater control, motor control and AC power supplies. C50EX500 is also used in controlling power supplies in electrical equipments such as computers and television systems, in voltage regulators and industrial equipment.
Working Principle
C50EX500 is a bidirectional semiconductor switching device that turns a current on and off when it is triggered. It works on the principle of turning a current on and off by controlling the gate current. It consists of four layers of alternating P-type and N-type material, with connections referred to as anode and cathode and an additional gate connection.
It works on the principle of the four layers or four junctions. The operation of the SCR typically starts with the gate terminal. A positive gate current is applied to the gate terminal of the SCR, which attracts majority carriers of holes and electrons to the gate region. This creates a junction between the gate and the anode which is similar to a normal PN Juction diode.
When the anode voltage increases, a forward biased PN junction between the anode and the cathode is established. This in turn current starts increasing and the SCR device conducts just like a normal diode between its anode and cathode. It remains in a conducting mode until the anode current drops below a certain value, which is the holding current.
The SCR switches off when the gate current falls below the cutoff value. This is the basic working of SCR device.
In conclusion
C50EX500 is a four junction thyristor that is used for power control and switching operations. These devices are used in applications such as AC rectification, phase control, lamp dimmer, heater control, motor control and AC power supplies. The devices operate on the principle of applying a gate current to initiate a conducting mode between anode and cathode. The device switches off when the gate current falls below the cutoff value.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
C50E | Powerex Inc. | 46.89 $ | 1000 | THYRISTOR STUD 70A 500V T... |
C50EX500 | Powerex Inc. | 48.47 $ | 1000 | THYRISTOR STUD 70A 500V T... |
KX14-160K5D-C50E | JAE Electron... | 0.0 $ | 1000 | CONNECTOR |
THYRISTOR 600V 12A TO220SCR 600V 18.8A S...
NCR100W-10L/SC-73/REEL 7" Q1/TSCR 850V 1...
SCR SENS 800V 800MA TO92-3SCR 800V 800mA...
THYRISTOR 200V 0.8A SOT54SCR 200V 800mA ...
THYRISTOR 600V 8A TO220SCR 600V 12.6A St...
THYRISTOR 600V 6A TO220SCR 600V 9.4A Sta...