Allicdata Part #: | C52PA-ND |
Manufacturer Part#: |
C52PA |
Price: | $ 54.92 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Powerex Inc. |
Short Description: | THYRISTOR STUD 70A 1100V TO-83 |
More Detail: | SCR Standard Recovery |
DataSheet: | C52PA Datasheet/PDF |
Quantity: | 1000 |
30 +: | $ 49.92790 |
Series: | -- |
Packaging: | -- |
Part Status: | Active |
Current - Non Rep. Surge 50, 60Hz (Itsm): | -- |
SCR Type: | Standard Recovery |
Operating Temperature: | -- |
Mounting Type: | -- |
Package / Case: | -- |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Thyristors - SCRs
Thyristors are a type of semiconductor switch consisting of four layers of alternating N-type and P-type semiconductor material. SCRs, or Silicon Controlled Rectifiers, are a type of thyristor specifically designed to control the flow of a power supply\'s current. C52PA is a type of SCR which is often used in various applications due to its controlled current output.
Applications of C52PA SCRs
C52PA SCRs are often used in power supply control systems to control the flow of current in a power supply. In addition, these SCRs are also used in motor control applications, wave-shaping circuits, solar battery chargers, and automotive lighting systems. Additionally, C52PA SCRs are also used in AC waveforms and flaw detection systems, and in low-voltage power converters. C52PA SCRs are popular because of their ability to provide a positive output current when the current reaches a preset limit.
Working Principle of C52PA SCRs
C52PA SCRs are four-layer thyristors specifically designed to manage the current in a power supply. The SCR consists of two opposing layers – one P and one N-type – and two neutral layers – one P and one N-type. When a current is fed in, the opposite layers act as a rectifier, allowing the current to pass but blocking any reverse current and thus the SCR can be used to control a power supply.
The C52PA SCRs also feature a static breakover or static holding capability which allows them to precisely control the current output. This static breakover is enabled by the two opposing layers of the SCR – P and N-type. When the current reaches a preset limit, the SCR begins to breakover and the output current increases at a positive rate until the load is reached.
In addition to the static breakover, the C52PA SCR also features a dynamic breakover mechanism which can respond to any sudden change in current. The dynamic breakover can also provide a faster response time than the static breakover and can be used to quickly respond to any sudden changes in power supply current.
C52PA SCRs also feature a safeguarding feature which prevents the output from overloading and burning out the components. When the current reaches a preset limit, the SCR will automatically shut off the power supply current and thus preventing any damage.
Conclusion
In conclusion, C52PA SCRs are a type of thyristor specifically designed to control the flow of a power supply\'s current. These SCRs are often used in power supply control systems and are also used in motor control applications, wave-shaping circuits, solar battery chargers, and automotive lighting systems. C52PA SCRs also feature static and dynamic breakover mechanisms which can be used to control the output current and prevent any overloading. Therefore, C52PA SCRs are a great choice for any application which requires precise control of a power supply\'s current.
The specific data is subject to PDF, and the above content is for reference
THYRISTOR 600V 12A TO220SCR 600V 18.8A S...
NCR100W-10L/SC-73/REEL 7" Q1/TSCR 850V 1...
SCR SENS 800V 800MA TO92-3SCR 800V 800mA...
THYRISTOR 200V 0.8A SOT54SCR 200V 800mA ...
THYRISTOR 600V 8A TO220SCR 600V 12.6A St...
THYRISTOR 600V 6A TO220SCR 600V 9.4A Sta...