C712L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs are one of the earliest invented types of semiconductor devices that require a gate signal to initiate conducting. SCRs can be used to control AC and DC power circuits in a variety of applications. One such application is the C712L SCR.

The C712L is a silicon controlled rectifier (SCR) that is designed to control current through the gate and to act as an on-off switch within an AC or DC circuit. The device has a breakdown voltage of 700 volts and a high holding current of 200mA, making it ideal for use in high power circuits. The C712L is composed of three anodes, a gate, and a cathode. When no current is flowing through the gate, the SCR is in the “off” state. When the trigger gate is pulsed, it allows a current to flow, thus turning the SCR on.

The C712L can be used to control a variety of circuits such as lamps, solenoids, motors, transformers and other power electronic devices. The C712L is typically mounted to a heatsink, as it dissipates significant amounts of power and heat when in use. It is also capable of continuous rectification for optimized performance and long life.

To control a circuit using the C712L SCR, a signal is sent to the device’s gate. The signal can be either AC or DC, depending on the desired application. If a DC signal is used, it must be of a sufficient magnitude to trigger the SCR. If an AC signal is used, the signal must be within the SCR’s operating frequencies. When the gate signal is applied, the SCR will turn “on” and allow current to flow through the device.

The C712L is used in a variety of applications, ranging from domestic lighting to industrial motor control. For example, the device can be used to control production lines in factories, or to regulate the flow of electricity in motor cars. In high power applications, the C712L can be used to switch loads at high power levels, allowing a load such as a motor to be switched on-off or even controlled in terms of speed. In addition, the device can be used to control the output current of large transformers, allowing for improved efficiency and reliability.

The C712L SCR is an invaluable tool for controlling power in applications where reliability and efficiency are of the utmost importance. Its capability to be triggered using both AC and DC signals and its ability to control large loads make it an ideal choice for controlling various industrial and home applications. Its high current carrying capacity and its ability to dissipate large amounts of heat make it a reliable and powerful choice in any application.

The specific data is subject to PDF, and the above content is for reference