C8051F041-GQR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Embedded microcontrollers are small computers that contain a processor core, memory, and programmable input and output peripherals. The C8051F041-GQR is a highly integrated 8-bit microcontroller designed for embedded applications. It is a rapid solution for embedded designs requiring high levels of integration in a small package.

The C8051F041-GQR runs at a maximum frequency of 25MHz and supports up to 64K bytes of program Flash memory, 8K bytes of RAM and 128 bytes of on-chip data flash memory. The device also features dual data Pointer (DPTR) registers, 16 general-purpose I/O pins, and a wide range of integrated peripherals including a UART, SPI, I2C, and programmable timer/counter. The device is also equipped with an 8-channel, 10-bit up counter.

The C8051F041-GQR is suitable for a variety of embedded applications, including personal entertainment systems, vending machines, remote controls, motor control, games and many other embedded applications. The device can be used in a wide range of industrial, medical, and other products. It is a cost-effective, low-power solution for embedded designs requiring high levels of integration.

In terms of working principle, the C8051F041-GQR consists of a program memory, data memory, and peripherals. It is based on a Harvard architecture which allows it to store and retrieve data and instructions separately. The program memory stores the firmware and instruction set used by the microcontroller while the data memory stores variables and parameters. The on-chip memory is organized as RAM, ROM, EEPROM, and Flash memory. The device can use both internal and external memory to store data used in embedded applications.

The C8051F041-GQR also has integrated peripherals such as an 8-bit Timer/Counter (T0C), UART, SPI, I2C and comparator modules. These peripherals are used for communication and timing purposes. The 8-bit Timer/Counter (T0C) is used to generate periodic interrupts, count events, and measure time intervals. The UART is used for serial communication with other devices. The SPI is used to communicate with other devices in a synchronous data transfer, while the I2C is used for fast and efficient data communication between devices. The comparator module can be used to compare two analog signals.

Overall, the C8051F041-GQR is a low cost, low power solution for embedded systems requiring high levels of integration in a small package. It is highly suitable for a variety of embedded applications, such as personal entertainment systems, vending machines, remote controls, motor control, and games. The device also incorporates a wide range of integrated peripherals such as a timer/counter, UART, SPI, and I2C, which make it suitable for a wide range of applications. The device supports up to 64K of program Flash, 8K of RAM and 128 bytes of on-chip data Flash memory to store data used in embedded applications. Therefore, the C8051F041-GQR microcontroller can be a reliable and efficient embedded device for all kinds of embedded applications.

The specific data is subject to PDF, and the above content is for reference