C8051F507-IM

Program Memory Type:	FLASH
Base Part Number:	C8051F50
Supplier Device Package:	32-QFN (5x5)
Package / Case:	32-VFQFN Exposed Pad
Operating Temperature:	-40°C ~ 125°C (TA)
Oscillator Type:	Internal
Data Converters:	A/D 25x12b
Voltage - Supply (Vcc/Vdd):	1.8 V ~ 5.25 V
RAM Size:	4.25K x 8
EEPROM Size:	--
Series:	C8051F50x
Program Memory Size:	32KB (32K x 8)
Number of I/O:	25
Peripherals:	POR, PWM, Temp Sensor, WDT
Connectivity:	SMBus (2-Wire/I²C), SPI, UART/USART
Speed:	50MHz
Core Size:	8-Bit
Core Processor:	8051
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>The C8051F507-IM is a highly integrated microcontroller unit (MCU) based on high-performance 8051 microcontroller architecture. It features an on-chip Enhanced Enhanced Low-Power (EEP) low-power peripheral, a SLEEP mode, and a 128kB Flash memory plus 4kB of RAM. This MCU offers a wide range of applications for embedded systems, ranging from automotive infotainment and telematics systems to healthcare and smart grid applications.</p><p>In automotive systems, C8051F507-IM can be used as an interface between the vehicle’s in-dash information system and its various components. It can be used to enable the user to access and control a variety of vehicle\'s in-dash systems, such as climate control, radio and entertainment systems, the vehicle’s on-board diagnostic systems and safety systems, and the infotainment system. It can also be used to integrate the various components of the vehicle, such as the powertrain, emission systems and airbags, into a unified control system.</p><p>In the healthcare sector, C8051F507-IM can be used as a platform for medical devices. It can be used to develop medical or laboratory instruments, or to monitor patient vital signs. It can also be used for telemedicine, to provide remote access to medical parameters such as heart rate, blood pressure and electrocardiogram readings.</p><p>In the smart grid technology sector, C8051F507-IM can be used to create smart grid applications such as demand response controllers and smart grid controllers. It can also be used as an interface between the utility provider and the customer’s energy system, to optimize energy consumption and monitor energy use.</p><p>The C8051F507-IM is based on 8051 core, which has been optimized to reduce power consumption and maximize processing performance. It uses on-chip peripherals and hardware-based bootloader to speed up the hardware setup process. It has an onboard Enhanced Low-Power (EEP) peripheral which has a lower power consumption than that of its predecessor. The EEP peripheral allows the processor to consume less power when it is idle and also to save power by turning off unused peripherals. It also features a SLEEP mode which allows the processor to be put into a low-power mode and thereby reduces power consumption.</p><p>The C8051F507-IM also has a 128kB Flash memory plus 4kB of RAM which make it suitable for use in a wide range of embedded applications. The Flash memory is used to store program instructions, variables and constants. The RAM is used to store both program instructions and data. The on-chip Flash and RAM makes the development of applications for the C8051F507-IM simpler and faster.</p><p>The C8051F507-IM is an ideal solution for a wide range of embedded applications due to its High-Performance 8051 architecture, its low-power consumption, its on-board memory and its wide range of peripherals. It is also suitable for applications in sectors ranging from automotive to health care.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description