Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

The CA5060100R0JR05 is a type of through hole resistors. Through hole resistors refer to those that are mounted into a circuit board by placing the leads into the board. This type of mounting is usually achieved with the use of a soldering iron.

This resistor is a non-inductive resistor which means it does not generate a magnetic field. It has an operating temperature range of -55°C to 125°C and is rated at a maximum voltage value of 500 V and power value of 0.5 W. It is made of metal alloy and manufactured to international standards for a consistent level of performance and reliability.

Application Field

The CA5060100R0JR05 is mainly used in industrial and commercial applications such as motor control, light dimming, CCTV systems, voltage regulation, and energy management systems. The resistor is suitable for both AC and DC operating voltages and is used to create a precise voltage drop across the load for optimum performance.

Through hole resistors are also used in switching power supplies, signal processors, and communication systems for protecting against high voltage transients. The resistor is often combined with other components such as capacitors to form a snubber circuit, protecting sensitive components in the systems from power surges.

Working Principle

The CA5060100R0JR05 works by limiting the current in a circuit. It has a resistance rating of 100 Ωs and is designed to limit the current to a predetermined level, thus preventing the circuit from becoming overloaded and short-circuiting. The resistor works on Ohm’s law which states that current is proportional to the voltage across a resistor and inversely proportional to the resistance.

Therefore, the resistor will dissipate a certain amount of power as heat when it is in operation. This is known as the power rating of the resistor and is indicative of the resistor’s maximum allowable current before it starts to fail. The power rating is specified in watts which is equal to the voltage squared divided by the resistance of the resistor.

The operating temperature of through hole resistors is also important and this usually ranges between -55°C and 125°C. It is important to ensure that the resistor does not exceed its maximum operating temperature. If the maximum operating temperature is exceeded, the resistor will fail and potentially damage the circuit it is connected to.

Conclusion

In conclusion, the CA5060100R0JR05 is a through hole resistor which is used in a variety of industrial and commercial applications. It has an operating temperature range of -55°C to 125°C and is rated at a maximum voltage value of 500V and power value of 0.5W. It works by limiting the current in a circuit by dissipating a certain amount of power as heat, and is designed to prevent the circuit from becoming overloaded.

The specific data is subject to PDF, and the above content is for reference