CAF94157(IDM2450-RT36)

VSWR:	1.8
Applications:	--
Height (Max):	1.417" (36.00mm)
Mounting Type:	Adhesive
Ingress Protection:	--
Termination:	Connector, RP-TNC
Features:	--
Gain:	8.5dBi
Return Loss:	--
Series:	Whisper™
Number of Bands:	1
Antenna Type:	Module
Frequency Range:	2.4GHz ~ 2.5GHz
Frequency (Center/Band):	2.4GHz
Frequency Group:	UHF (2 GHz ~ 3 GHz)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF antennas are used in a variety of wireless communication applications. The CAF94157 (IDM2450-RT36) is an uncommon type of antenna that has been designed to work in the 2.4 GHz to 2. 5 GHz frequency range. This antenna was developed to be used in applications where power efficiency is essential, such as remote controls, wireless handsets, and RFID tags.The CAF94157 (IDM2450-RT36) is a tall, cigar-shaped antenna that is based on the original dipole antenna design. It is constructed from a coaxial cable and is enclosed in a plastic case to keep it from being damaged in the environment. This antenna has an impedance of 50 ohms and a bandwidth of 250 MHz. It has a typical gain of 4.5 dBi with a half-power beam-width of 30 degrees.The CAF94157 (IDM2450-RT36) has been designed for use in applications where it will be placed directly within the range of wireless signals that it needs to receive and transmit. This antenna is ideal for applications such as phone systems, remote controls, drones, and security systems. It can also be used in more demanding applications, such as long-range Wi-Fi and Bluetooth systems.In order to work properly, the CAF94157 (IDM2450-RT36) needs to be correctly orientated towards the source of wireless signals. This antenna must also be placed in the correct location to ensure interference-free reception and transmission. The antenna should be placed at least 20cm away from any other antennas or signal-relaying devices.The working principle of the CAF94157 (IDM2450-RT36) is quite simple. This antenna is designed to receive and transmit radio frequency radiation. It works by converting electrical signals from the source into radio waves that travel through the air. The antenna then receives the incoming radio waves and converts them back into electrical signals that are sent to the receiver.In order to ensure that the antenna is working properly, the impedance of the antenna must match the impedance of the source that is sending the signal. If the impedance does not match, then the antenna will not be able to effectively receive or transmit the signal. In addition, the antenna must be correctly placed in order to ensure that the signals are correctly received.The CAF94157 (IDM2450-RT36) is a versatile antenna that is perfect for a wide range of applications. Its frequency range, power efficiency, and small size make it an ideal choice for many wireless communication applications. Its straightforward design makes it easy to install and maintain, and its ability to effectively receive and transmit radio waves makes it a great choice for many types of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description