CBR10-J020

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	200V
Current - Average Rectified (Io):	5A
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 5A
Current - Reverse Leakage @ Vr:	10µA @ 200V
Operating Temperature:	-65°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-Square, CM
Supplier Device Package:	CM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CBR10-J020 is a bridge rectifier, which is a type of diode specifically designed for converting alternating current (AC) to direct current (DC). It is a component of a power supply or AC-to-DC converter, which is why it is so often found in power supplies for consumer electronics, lighting fixtures, and industrial machinery. The purpose of a bridge rectifier is to convert an AC signal into a pulsed direct current that can be regulated for use in an electronic circuit. Bridge rectifiers are designed using four diodes arranged in a "bridge" configuration, which is why they are called "bridge rectifiers". The CBR10-J020 specifically is a 10-Amp, 600-Volt bridge rectifier, meaning that it will deliver 10 Amps of current at a maximum voltage of 600 Volts. This makes it suitable for a wide range of applications. To understand the working principles of a bridge rectifier, it is important to first understand the concept of diode polarization. A diode is a two-terminal electronic component that allows electricity to pass through it in only one direction. This is called "forward-biased" conduction. If the current is reversed, meaning it is sent from the low-voltage side to the high-voltage side, the diode will not allow the current to pass through and creates a "reverse-biased" conduction. The bridge rectifier utilizes this concept of diode polarization to convert AC to DC. The bridge rectifier works by using the four diodes to form two sets of two series-connected diodes, called "arms". Each arm is connected across alternating half-cycles of the AC signal and the two sets of diodes are connected in such a way that if one arm is forward-biased, the other is reverse-biased and vice versa. This allows the bridge rectifier to effectively pass current in one direction only and eliminates the negative half-cycles of the AC signal, resulting in pulsed DC. The CBR10-J020 is used in a wide range of applications, including power supplies and AC-to-DC converters. Its high current and voltage ratings make it suitable for high-power applications, such as in heavy-duty power supplies and motors. It can also be used in many smaller-scale applications, such as in portable electronics and lighting fixtures. The CBR10-J020 is a popular choice for engineers as it has a wide range of applications and is both reliable and cost-effective. Its robust design and reliable performance make it ideal for a wide range of applications and its high current and voltage ratings make it suitable for even the most demanding power supplies and AC-to-DC converters. Overall, the CBR10-J020 is a reliable and cost-effective bridge rectifier that is used in a wide range of applications. Its four-diode bridge configuration allows it to convert AC to pulsed DC and its high current and voltage ratings make it suitable for even high-power applications. It is a reliable choice for engineers in need of a bridge rectifier for any application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description