CBR10F-J080

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A diode bridge is an arrangement of four diodes connected in a bridge circuit configuration that enables the conversion of an alternating current (AC) input into a direct current (DC) output. A bridge rectifier has two AC inputs and two DC outputs, which are usually connected in a star or delta configuration. The most common type of bridge rectifier is the eight terminal single phase full wave rectifier.

The CBR10F-J080 belongs to the class of bridge rectifiers, which are ideal for use in area of DC power conversion.They are largely used in industrial equipment, power supplies, DC to AC inverters and even in general automobiles. The device feature low forward voltage drop and high reverse voltage ratings as well as high surge current capabilities.

The CBR10F-J080 bridge rectifier consists of four terminals, two of which are designated as anode (+) and cathode (-). The anode and cathode are connected to the AC voltage inputs and the DC voltage output. The anode is connected to the anode of the opposite diode through a load resistor, while the cathode connects to the same diode\'s cathode. The two diode pairs are oriented in different directions so that whenever AC voltage is applied, current is allowed to flow in one direction only.

The working of the CBR10F-J080 rectifier requires that the anode be positive and the cathode negative for each alternating half-cycle. During the positive half-cycle the anode of the upper diode and the cathode of the lower diode are forward biased. This allows current to flow from the input positive line, through the upper diode to the cathode of the lower diode, through the load and then back out to the negative line. During the negative half cycle the polarity of the voltages are reversed. This causes the current to flow in the opposite direction, i.e., from the negative line to the upper diode, through the lower diode to the anode of the upper diode, and then back out to the positive line.

The CBR10F-J080 is suitable for use in rectifying full-wave bridge configurations. It offers a wide range of output voltage ratings, from 200V to 1000V, and is designed for relatively moderate current ranges, from 3A to 10A. The operating temperature range is from -40°C to +150°C. The CBR10F-J080 offers low forward voltage drop, high reverse voltage ratings and high surge current capabilities.

In summary, the CBR10F-J080 is a type of bridge rectifier which features low forward voltage drop and high reverse voltage ratings. It is suitable for rectifying full-wave bridge configurations and its operating temperature range is from -40°C to +150°C. It is commonly used in DC to AC inverters, industrial equipment and even in automobiles.

The specific data is subject to PDF, and the above content is for reference