CC1000-RTB1

Power - Output:	10dBm (Max)
Package / Case:	28-TSSOP (0.173", 4.40mm Width)
Operating Temperature:	-40°C ~ 85°C
Current - Transmitting:	5.3mA ~ 26.7mA
Current - Receiving:	7.4mA ~ 9.6mA
Voltage - Supply:	2.1 V ~ 3.6 V
Serial Interfaces:	UART
Memory Size:	--
Sensitivity:	-110dBm
Series:	--
Data Rate (Max):	76.8kBaud
Frequency:	315MHz, 433MHz, 868MHz, 915MHz
Modulation:	FSK
Protocol:	--
RF Family/Standard:	General ISM
Type:	TxRx Only
Part Status:	Not For New Designs
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Transceiver ICs

The CC1000-RTB1 is an integrated circuit (IC) specifically designed for use in radio frequency (RF) transceiver applications. It is a very low power device designed for energy-efficiency and small form factor. It is intended to replace traditional application specific devices used for RF communication, such as modems and transceivers, and is especially suited for use in remote devices.

CC1000-RTB1 Specifications

The CC1000-RTB1 is a low power IC with a maximum current draw of 140mA. It has an operating voltage range of 1.8V - 3.6V and requires an external passive components such as an antenna, matching circuit, and filter for operation. It has an internal oscillator of 4.5MHz to 32MHz, and a selectable band of view from 824MHz to 979MHz. It includes a built in loop filter as well as a 16-bit SPI input for configuration of various channels and protocols, and the output is a PWM signal.

CC1000-RTB1 Applications

The CC1000-RTB1 is well suited for a variety of applications, including wireless data transmission, remote sensing, and system-to-system communication. Its low power draw and flexibility makes it ideal for applications such as wearable medical equipment, remote controls, and wireless security systems. Additionally, it can be used for wireless communication between a controller and an actuator, allowing for efficient control of devices such as robotics and automation.

CC1000-RTB1 Working Principle

The CC1000-RTB1 works by using a low frequency impulse to modulate and send a signal, while a crystal oscillator is used to receive and demodulate the signal. The device utilizes a process called amplitude shift keying (ASK) to modulate and send the signal. This modulation technique involves shifting the frequency of the signal between two states, one being a digital “1” and the other a digital “0”. This allows the receiver to easily decode and interpret the encoded signal. The CC1000-RTB1’s demodulation process is also very simple. The device utilizes a process called frequency shift keying (FSK), which involves shifting the frequency of the signal between two states to represent the 0 and 1 bits. The device’s receiver is capable of detecting the frequency of the signal, and from that is able to accurately interpret the digital signal. Once the signal has been received, the CC1000-RTB1 can then decode and process it according to the protocol that was sent with the signal.

Conclusion

The CC1000-RTB1 is an excellent choice for RF transceiver applications due to its low power draw, flexibility, and ability to support a wide range of frequencies and protocols. It is also very easy to use and configure, thanks to its built-in process and support for SPI inputs. Its ability to modulate and demodulate signals make it a powerful tool for wireless data transmission, remote sensing, and system-to-system communication.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description