CC12SA110

Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Contactors are among the most widely used electromechanical devices. They are used to switch electrical loads in industries, residential, and commercial applications. The CC12SA110 contactor is an AC contactor designed to do just this. This article will discuss the application fields and working principle of the CC12SA110 contactor.

Application Fields

The CC12SA110 contactor is designed for AC switching applications ranging from 230V to 690V. It is particularly useful in single-phase motors, pumps, fans, and other AC loads up to a rated peak current of 110A. It is also used to control lighting and other general-purpose loads.

Design Overview

The CC12SA110 contactor is made of a high-quality, corrosion-resistant base material, with a panel-mountable design. It has an ultra-low profile design and can fit into tight installations. It has a minimum of four UL-approved contacts – two connected to the coil, two to the load – and is energized only when activated by the coil.

Working Principle

The CC12SA110 contactor is a single-pole, double-throw (SPDT) switch that uses an electric coil to actuate its armature. When the coil is energized, an electromagnetic field is generated. This field causes the armature to move, closing the contact points and completing the circuit. When the coil is de-energized, the electromagnetic field collapses, causing the armature to move back, opening the contact points and breaking the circuit.

Conclusion

The CC12SA110 contactor is a single-pole, double-throw (SPDT) switch designed for AC switching applications. It is particularly useful in single-phase motors, pumps, fans, and other AC loads up to 110A. It is made of corrosion-resistant material and has an ultra-low profile design. The working principle of the CC12SA110 contactor is based on the use of an electric coil to actuate its armature and create an electromagnetic field to close the contact points and complete the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description