CC22/4SA240

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CC22/4SA240 is an electromechanical contactor that is commonly used in power-switching applications. It is widely used in industrial, commercial and residential applications due to its reliable and efficient operation. This device can be used for controlling light load applications or medium/high-voltage applications, depending on the installation requirements. This device can also provide a suitable solution for motor overload protection and immunity from electromagnetic interference.

The CC22/4SA240 contactor features an AC coil that is powered by a power source in the range of 16-38VDC. When the coil is energized, a permanent magnet is engaged, which in turn opens the contactor\'s contacts. The contacts remain closed until the coil is de-energized. This mechanism enables the contactor to act as an on/off switch in response to the control signals from the main processor or power source.

The CC22/4SA240 employs an inherently low-noise switched-mode operation that provides silent operation. This is important for applications where noise levels must be maintained at low levels, such as medical and security systems. The contactor is also very efficient in terms of power consumption, which is important for making it cost-effective for industrial and commercial applications.

The CC22/4SA240 is suitable for use in a wide range of applications, such as industrial HVAC and lighting control, motor start and stop, relay interface, and other industrial and commercial power switching applications. This contactor is CE and UL approved and is capable of handling currents up to 4A. It is also RoHS compliant and provides protection against short circuits.

The working principle of the CC22/4SA240 contactor is based on the magnetism generated by the coil when it is energized. The operation of the contactor is relatively simple as it is a solely mechanical device. When the control switch is activated, the coil is energized and the resulting magnetic force magnetizes the contactor\'s permanent magnet. This causes the contactor\'s contacts to open and the contactor to become dead. When the coil is de-energized, the magnetic force on the contactor is cancelled and the contactor\'s contacts are reset

The specific data is subject to PDF, and the above content is for reference