CC65SA220

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CC65SA220 contactors are a type of electromechanical contacts. They are used in a variety of applications to control electric circuits. The contactor is made up of two parts, a basic contactor and a control component. The basic contactor consists of two stationary contacts and a movable contact. The control component is used to activate the contactor when required.

The contactor has an open and a closed state. In the open state, the movable contact is separated from the stationary contacts and the electric circuit is broken. In the closed state, the contactor is activated and the movable contact is connected to the stationary contacts, thus completing the electric circuit. The contactor can be controlled either manually (using a switch or button) or automatically (using a signal from another device or system).

The working principle of a CC65SA220 contactor starts with an external voltage being applied to the contactor. This voltage is used to close the electromagnetic coil, which then produces a magnetic field. This magnetic field interacts with the movable contact, causing it to move from the open state to the closed state. When the voltage is removed, the magnetic field disappears and the contactor is deactivated, returning the contact to the open state.

CC65SA220 contactors are used in a variety of applications including industrial control equipment, motor control systems, and low-power lighting circuits. They can be used to control high current loads, such as large motors, and are especially suitable for high-start currents and frequent starting. They can also be used in hazardous areas, where safety requirements are particularly high.

In conclusion, CC65SA220 contactors are a type of electromechanical contact that are used to control electric circuits. They are typically used in industrial control equipment, motor control systems, and low-power lighting circuits. They can also be used in hazardous areas for extra safety. The contactors work by closing the electromagnetic coil when a voltage is applied, which then interacts with the movable contact to move it to the closed state, activating the circuit. When the voltage is removed, the contactor is deactivated, returning the contact to the open state.

The specific data is subject to PDF, and the above content is for reference