CD4027BEG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip flops are classical components in the field of logic circuits and digital systems since a long time. They are used to save data in a form of a bit. Today they are used as individual components or as a part of a larger integrated circuit. Among them, CD4027BEG4 is considered to be one of the most commonly used universal flip flop that can be applied in various areas of digital systems.

CD4027BEG4 is a dual JK flip flop available in 16-pin DIP and SOIC packages. It is equipped with two independent positive edge-triggered JK flip-flops with preset (PRE) and clear (CLR) inputs. The set up and holds times are independent of each other, and of the power supply voltage as well. This device can operate with power supplies from 3 V to 15 V. Consequently, it can be operated with both TTL and 5 V CMOS levels.

The working principle of CD4027BEG4 is based on the behaviour of the JK flip-flop when connected to external memory elements and the input signals. The following table lists the behaviour of the flip-flop depending on the input signals:

As a result, the outputs Q and Q are controlled by the input signals J, K, PRE and CLR. The flip-flop holds the value of the previous step if no change of the input signals takes place.

CD4027BEG4 is mainly used in sequential logic circuits and digital systems. Its application field includes counters, registers, and shift registers. It is also useful in maskable and programmable devices such as microprocessor-controlled systems or programmable logic controllers. Due to these features, the CD4027BEG4 is widely used in computers, embedded systems, and other types of digital electronics.

In conclusion, CD4027BEG4 is a dual JK flip flop available in two different packages. It is equipped with two independent positive edge-triggered JK flip-flops with preset and clear inputs. The working principle of CD4027BEG4 is based on the input signals J, K, PRE and CLR. It is mainly used in sequential logic circuits, digital systems, and programmable devices. Thus, it is widely used in computers, embedded systems, and other types of digital electronics.

The specific data is subject to PDF, and the above content is for reference