CD4027BMT

Max Propagation Delay @ V, Max CL:	90ns @ 15V, 50pF
Base Part Number:	4027
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 125°C (TA)
Input Capacitance:	5pF
Current - Quiescent (Iq):	4µA
Voltage - Supply:	3 V ~ 18 V
Current - Output High, Low:	6.8mA, 6.8mA
Trigger Type:	Positive Edge
Series:	4000B
Clock Frequency:	24MHz
Number of Bits per Element:	1
Number of Elements:	2
Output Type:	Differential
Type:	JK Type
Function:	Set(Preset) and Reset
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Flip FlopsFlip-flops are circuits that can store binary information in the form of two possible states. A common type of Flip-flop is the CD4027BMT, which was developed by Fairchild Semiconductor in 1965. This device is widely used in many applications, including sequential logic, multiplexers and registers. In this article, we will discuss the application fields and working principle of the CD4027BMT Flip-flop.Applications of CD4027BMT Flip-flopThe CD4027BMT is a dual, 2-input positive edge-triggered J-K Flip-flop. It is used in many applications where a set and reset feature is needed. It can also be used for latches and as a data register. The device is widely used in address decoding, counter, frequency division and in memory devices like ROMs and EPROMs. In addition, it is also used in digital logic systems to store information in the form of 1’s and 0’s. It can be used in digital logic systems to perform block operations such as serial-to-parallel or parallel-to-serial conversions. The CD4027BMT Flip-flop is also used in timing applications and in power monitoring circuits. It can be used to control the speed of a motor or the frequency of a clock signal. It can also be used in power switching circuits for power supply control.Working Principle of CD4027BMT Flip-flopThe CD4027BMT is a dual, 2-input J-K Flip-flop. It consists of two cross-coupled NOR gates with two J and two K inputs. The outputs from the two NOR gates are connected together to form the Q and Q’ outputs. The inputs of the device must be set first. The J and K inputs are set to the desired logic states. A positive going edge(rising edge) then causes the outputs to switch states. If both J and K inputs are set to logic 1, the output will toggle, or go from logic 0 to logic 1 or vice versa, on each clock pulse.The CD4027BMT Flip-flop also has a set and reset indication. The set and reset inputs, S and R respectively, can be used to override the J and K inputs. When these inputs are asserted they will change the output to a logic 0 or logic 1 as desired.ConclusionThe CD4027BMT Flip-flop is a widely used device that has many applications. It stores binary information in two possible states and is used in many digital logic systems. It is used in address decoding, counters, timing applications and power monitoring circuits. It also has a set and reset indication for overriding the J and K inputs. This device has many uses and is a valuable component in any digital system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description