CD4035BEG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD4035BEG4 is a 4-bit, parallel-output, serial-input register which belongs to the logic shift registers category. It is a 5-stage parallel access shift register with a serial data input. This IC has an average delay time of 75 ns and operates over a voltage range of 4.5 to 5.5 volts. It is used in a wide range of applications, from controlling multiple displays to data format conversion.

The CD4035BEG4 has four parallel output lines: QA, QA2, QB and QB2. Each output line is the complement of the corresponding output line. The device also contains an asynchronous reset input, which when held LOW will reset all bits (QA to QB2) to the 0 state. There is also a serial input pin (SI) used to shift in data to the device. As is typical of all shift registers, data applied to the SI pin will be clocked through the register while being shifted bit by bit to the corresponding outputs, QA to QB2. The shifting of data is done on the rising edge of the clock signal, if enabled.

The CD4035BEG4 shift register works by using a serial-in/parallel-out process. Data is loaded into the register one bit at a time using the SI pin, which is normally connected to a source of serial data. The serial data is shifted in and stored bit by bit as controlled by a clock signal. In other words, each bit of the serial data is shifted into the register on a rising edge of the clock signal. Once the serial data is stored in the register, parallel data can be read from the register’s output pins (QA to QB2). This parallel component is of particular importance for higher speed operations.

The CD4035BEG4 has numerous potential applications. It can be used for data acquisition, to shift data from a sensor or a microcontroller. It can be used to implement low-cost multiplex displays for displaying numerical or alpha-numeric information. The device can also interface with a memory to reduce the number of address lines required. It can also be used to perform arithmetic operations like addition and subtraction as well as bit manipulation. Furthermore, the device can also be used in memory management applications.

Overall, the CD4035BEG4 is a powerful and versatile device that has a wide range of applications. It has a fast throughput, low power requirements and low cost. It is a reliable and cost-effective way of achieving low to moderate speed data formatting applications.

The specific data is subject to PDF, and the above content is for reference