CD4053BPWG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CD4053BPWG4 is a three-channel CMOS analog multiplexer/demultiplexer and is a member of Texas Instruments’ 4000 series CMOS logic ICs. The IC is typically used for connecting analog signals to systems controlled by digital signals, and offers multiplexing, switching and logic control between analog signals and digital signals.The device is an IC consisting of three separate INVERTING analog switches and has one single-pole triple-throw (SP3T) switch and two single-pole double-throw (SPDT) switches. The IC implements the SPI interface communication protocol to control the opening and closing of the switches from the digital inputs.

CD4053BPWG4 is designed to accommodate logic voltages of 3V to 15V and consequently has a very small on-resistance when operating at voltages up to 15V. The advantage of using this IC is that it requires very low control power as it only requires around 1uA when operating and switching ON/OFF. It also features fast switching performance with a maximum switching speed of 75MHz. Other advantages of using this IC include an immunity to EMI and an immunity towards latch-up, high input impedance and low leakage current.

CD4053BPWG4 operates on two of the three control inputs, SELECT and LOGIC SELECT, by switching the required analog signals to the digital system. The SELECT input determines which of the three channels is being switched. For example, if SELECT digital input is 1, then channel 0 will be selected and channels 1 and 2 will be open. The LOGIC SELECT input determines the logic state of the other two channels. If the LOGIC SELECT input is 0, then channels 1 and 2 will be connected to ground. Conversely, if the LOGIC SELECT input is 1, then channels 1 and 2 will be open and will stay in their last state.

The CD4053BPWG4 is widely used in applications such as audio mixing, tone control, signal routing, signal sampling and signal conditioning. It is also used in automotive applications, test and measurement equipment, wireless communications, medical equipment and industry control systems. In audio applications, the IC can be used to control the level of signals between analog and digital systems while in medical applications, the IC can be used to sample and route signals between different systems.

The CD4053BPWG4 is also used in a variety of other applications such as data acquisition, signal routing and signal switching. In data acquisition, the IC switches signals from digital to analog converter and back to the digital system for further processing. In signal routing applications, the IC is used to direct signals for applications such as audio mixing, signal switching and signal conditioning. In signal switching, the IC is used to open and close digital signals from an analog system such as amplifiers and can be used to switch between multiple input signals.

In conclusion, the CD4053BPWG4 offers a wide range of features including low on-resistance, low power consumption, high input impedance, fast switching performance and immunity to EMI and latch-up. The IC is widely used in applications such as audio mixing, data acquisition, signal routing, signal sampling, signal conditioning, automotive applications, wireless communications, medical applications and industrial control systems. With its combination of both analog and digital control, this IC provides an ideal solution for many applications requiring both analog and digital control.

The specific data is subject to PDF, and the above content is for reference