CD4522BEG4

Timing:	--
Base Part Number:	4522
Supplier Device Package:	16-PDIP
Package / Case:	16-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 125°C
Voltage - Supply:	3V ~ 18V
Trigger Type:	Positive, Negative
Count Rate:	8MHz
Series:	4000B
Reset:	Asynchronous
Number of Bits per Element:	4
Number of Elements:	1
Direction:	Down
Logic Type:	Divide-by-N
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD4522BEG4 application field and working principle are important components of a logic circuit. A logic circuit is a type of digital circuit that processes signals based on logical operations. This type of circuit is used to perform Boolean operations, such as AND, OR, NOT, and NAND. A logic circuit typically contains several gates, flip-flops, multiplexers, and other components.The CD4522BEG4 is a CMOS logic IC (Integrated Circuit), specifically a 7-stage synchronous ripple counter. This type of counters is made up of 7 flip-flops. The flip-flops are connected in a loop, with each flip-flop triggering the next one. In this way, each flip-flop will store the state of the previous flip-flop and transfer it to the next. The CD4522BEG4 is designed with a wide operating range and low power consumption level. It can be used in a variety of applications, such as digital clocks, frequency dividers, and ripple counters.The CD4522BEG4 has two modes of operation, counter mode and divider mode. In counter mode, the device will count up and down in synchronous increments based on an external clock signal. The external clock signal can be a square wave, or a substantially low frequency. In divider mode, the device will divide an incoming signal by two, outputting a signal at half the frequency of the incoming signal. This type of application is commonly used in audio circuits, and is utilized in various kinds of digital circuits.The CD4522BEG4 is constructed with two power supply pins, VDD and VSS. The VDD pin is connected to the positive voltage supply, and is used to power the device. The VSS pin is connected to ground, and is used to return current from the IC. This type of logic device is also constructed with two enable pins for setting the output count and the direction of the count. These two enable pins are labeled “DN” and “UP”, and will cause the device to count up or down respectively.In addition to the power supply and enable pins, there are also two clock pins and nine output pins on the CD4522BEG4. The clock pins allow the device to be synchronized with an external clock signal. The output pins are labeled “Q0-Q7”, and each one will correspond to a certain bit of the 7-bit output count. This output count can be used to determine the frequency of the signal that is outputted by the device.The CD4522BEG4 is a versatile logic device that can be used in a variety of different applications. It can be used as a logic gate implementation, a counter, or a divider. It can be used in frequency divider applications, such as audio circuits and digital clocks. The device can also be used in ripple counter applications, where it functions as a synchronous ripple counter. This allows the device to count up and down in synchronous increments based on an external clock signal.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description