CD74AC08MG4

Current - Output High, Low:	24mA, 24mA
Base Part Number:	74AC08
Package / Case:	14-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	14-SOIC
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 125°C
Max Propagation Delay @ V, Max CL:	8.7ns @ 5V, 50pF
Logic Level - High:	1.2 V ~ 3.85 V
Logic Level - Low:	0.3 V ~ 1.65 V
Series:	74AC
Current - Quiescent (Max):	4µA
Voltage - Supply:	1.5 V ~ 5.5 V
Features:	--
Number of Inputs:	2
Number of Circuits:	4
Logic Type:	AND Gate
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74AC08MG4 logic gate is a type of integrated circuit (IC) built in a quad two-input AND-OR gate. A quad two-input AND-OR gate is a digital circuit doing the logical operation of AND-OR within one chip. It consists of four independet AND-OR circuits, each with two inputs. It is designed to accept correct input signals and generate an output signal that is the logical AND-OR of the two input signals. The CD74AC08MG4 logic gate is a high-speed, TTL-compatible logic gate IC with Schottky circuitry. The IC is specifically designed for high-speed operation and to be used in applications where high noise immunity and low power consumption are desired.The CD74AC08MG4 logic gate is used in a variety of applications, including data transmission, signal switching, signal processing, signal generation, and so on. It is commonly used as a signal buffer in computer peripherals, radio frequency (RF) communications systems, digital signal processing (DSP) applications, and many other circuits. Due to its low power consumption, it is used in battery-operated devices. It is also used in automated logic circuits to implement logic functions such as adders, comparators, multiplexers, and shift registers.The CD74AC08MG4 logic gate has two input signals, a D (data) input and an S (select) input. When the S input is LOW, both of the D inputs are allowed to pass through to the output. When the S input is HIGH, only one of the two inputs is allowed to go through, which is selected by the Du input. The truth table of the CD74AC08MG4 logic gate is given below.

S Input	D0 Input	D1 Input	Output
LOW	X	X	D0 OR D1
HIGH	LOW	X	D0
HIGH	HIGH	X	D1

The CD74AC08MG4 logic gate\'s working principle lies in its two-input transit gate design. This gate design contains two transistors and two diodes connected in opposite directions as shown in the figure below. When the input signals is LOW, both transistors turn ON, allowing the output signal to move through both transistors and diodes. An OVER-CURRENT PROTECTION circuit is also added in order to prevent short-circuits if one of the two input signals is too high.The CD74AC08MG4 logic gate is an important component in many electronic devices. Its low power consumption and high speed are extremely beneficial for battery-operated devices, as well as digital systems that require quick and efficient results. With its two-input transitive circuit design and Schottky circuitry, the CD74AC08MG4 logic gate can be used in a variety of applications, making it an extremely versatile and valuable tool.References: [1] https://www.ti.com/lit/ds/symlink/cd74ac02.pdf[2] https://www.ti.com/lit/ds/symlink/cd74ac08.pdf[3] https://www.ti.com/lit/ds/symlink/cd74ac08-t.pdf[4] https://www.ti.com/lit/ml/mpm348/mpm348.pdf

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description