CD74HCT245E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74HCT245E is an 8-bit transceiver, of which the inputs and outputs are TTL compatible. It is used to transfer data between two buses which are using different signal levels, or between two systems which are using different system voltages. Furthermore, it can be used as a line driver for a system which is running at different signal levels or supply voltages.

The CD74HCT245E is from the HCT family of logic devices, and is usually available in two options: The CD74HCT245E and the CD74HCT245EQ. The two differ in the output current ratings; the CD74HCT245E has a rating of 24mA for high drive outputs, and the CD74HCT245EQ has a rating of 32mA for high drive outputs. The other important points regarding these two options are that the CD74HCT245E is available in both the commercial and industrial temperature ranges, while the CD74HCT245EQ is only available in the industrial temperature range.

The CD74HCT245E is basically a 3-state non-inverting buffer/driver. It has eight data inputs (A0 to A7), eight data outputs (Y0 to Y7), two enable inputs (OE and E) and two direction controls (DIR and DIRB). It also has eight mode control pins (M0 to M7), which are used to select the direction of data transfer.

The CD74HCT245E has the following features:

• The data inputs of the CD74HCT245E are TTL-compatible.
• It has an 8-bit data bus: 8 data inputs and 8 data outputs.
• It has two enable inputs: OE and E. When OE is low, all of the outputs are in the high impedance state; when OE is high, the outputs will change according to the state of the data inputs.
• It has two direction control inputs: DIR and DIRB. When DIR is high, data is transferred from the data input bus to the data output bus; when DIR is low, data is transferred from the data output bus to the data input bus.
• It has eight mode control pins: M0 to M7. These pins can be used to select the direction of data transfer.
• It has two voltage supply pins (VDD and GND).

The CD74HCT245E is used in a wide range of applications, such as data transmission, switching applications, and output buffering. It can also be used as a line driver in systems running on different signal levels or supply voltages. Moreover, it is ideal for interfacing TTL logic with MOS logic, as well as interfacing TTL logic with high voltage logic.

The CD74HCT245E has a working principle based on open-drain outputs. The output of the chip is an open-drain structure, which means that all the outputs are forced, in effect, to a common output node, known as the output bus. This output bus is then used to transfer data from one bus to another. Each output pin of the CD74HCT245E can be enabled or disabled independently, through the enable inputs OE and E. When an output pin is enabled, its output will go low (0) if the corresponding data input is low (0). Conversely, when an output pin is disabled, then its output will be in a high impedance (High-Z) state.

The direction of data flow can be controlled through the direction control pins; one of the direction control pins can be used to select the direction (from A to Y or from Y to A), while the other direction control pin can be used to select the mode of data transfer (bi-directional or single direction).

The CD74HCT245E is an effective solution for systems which require the transfer of data between two buses which are using different signal levels, or between two systems which are using different system voltages. It is also a great way to interface TTL logic with MOS logic, as well as TTL logic with high voltage logic. In addition, it can be used to buffer and drive multiple outputs at high current levels. For these reasons, the CD74HCT245E is a popular choice for many applications.

The specific data is subject to PDF, and the above content is for reference