CD74ACT245M96

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CD74ACT245M96 is an Integrated Circuit (IC) operated in an operating temperature range of -40°C to 85°C and it is available in various packages such as CD74ACT245M96, CD74ACT245M96E, CD74ACT245M96C and CD74ACT245M96M. It belongs to family ofMOS Logic - Buffers, Drivers, Receivers, Transceivers and this IC typically used for bus data transfers and simple 3-state devices.

The CD74ACT245M96 contains eight non-inverting buffers, and it typically used for driving an80-mA load. Each of these buffers is also capable of high impedance output level, making itusable for interface applications. It is designed to operate in a variety of applications including logic level conversion, switching, multiplexing, display drivers, interface buffers and power management.

The CD74ACT245M96 is constructed of an array of eight standard TTL inverters, which arepin-to-pin compatible with standard TTL outputs and TTL-compatible inputs. The output can bechanged between Push-Pull, High impedance, or Inverted, by a single-bit write operation. Eachbuffer has an active low enable input, allowing multiple buffers to be enabled in succession.The CD74ACT245M96 features high voltage outputs, allowing it to be used in many differentapplications. Its high current output enables it to be used in low-voltage to high-voltagetranslation applications and it is capable of driving loads of up to 80mA.

CD74ACT245M96 is designed to be used with TTL logic, and it has very low propagationdelay and lowest power consumption. It can be integrated into custom devices for a variety ofapplications such as logic level conversion, switching, multiplexing and display drivers. TheIC is available in both 5Vdd and 3Vdd versions, and it is backwards compatible with 5V TTLlogic devices. It is a cost-effective solution for interfacing digital systems, and the currentcapability of the IC enables it to be used in power-sensitive applications.

CD74ACT245M96 has an array of eight standard wired-AND gates and each has an activehigh enable input, allowing multiple drivers to be enabled in sequence. This makes it ideal forinterfacing isolated logic elements. The device also features internal pull-up resistors withcurrents of up to 800µA, so no external pull-ups are required. The device also features opencollector outputs, which allow it to be used as an open drain bus driver. The open collectoroutputs can sink current up to 80mA.

The CD74ACT245M96 is a versatile device and it can be used in a variety of applications. Itcan be used as a logic-level translator, for rail-to-rail analog-to-digital conversion, as well asfor memory expansion. It is also suitable for bus-width expansion and data bus control. The internalflow-through clocking feature allows it to be used in clock buffering and multiplexer applications.The device is also designed to be used in power managements systems and it can be used toself-power a single logic supply.

Overall, the CD74ACT245M96 is a versatile IC that can be used for a variety ofapplications. Its wide variety of features makes it suitable for both analog to digital logic-lev

The specific data is subject to PDF, and the above content is for reference