CD74HC595E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CD74HC595E logic shift registers are 8-bit serial-in shift registers from the Texas Instruments series of products. The CD74HC595E is particularly suitable for low voltage applications, with a VCC operating range of 3-4.5V. This makes it a great choice for working with batteries or other alternate sources of power. The shift register is designed to use a simple 2-wire serial interface with a Serial Data (DIS) and a Serial Clock (CLK) line. It offers its designer the option of a shared clock line or an independent clock line, depending on their needs.

The main application of the CD74HC595E is that of a data shifter or shift register. In this context, it is used to store 8-bits or a byte of data and then to clock that data out as an 8-bit parallel output. This shift register has a wide range of applications and is commonly used in microcontroller-based systems as a port expander to enable more parallel I/O ports than may be available in the controller itself. This allows for larger data transfers in embedded systems.

In terms of working principle, the CD74HC595E makes use of two clock lines - the RCLK (Load), a single logic pulse that is used to accept data into the register and the CLK (Shift), a regular clock pulse that shifts data through the register. Data that is held in the register is clocked out via the 8-bit parallel output bus. The 8-bit output bus can be used to address or control devices such as LEDs, relays, and switches.

The CD74HC595E has two 8x8-bit register latches for storage with each register holding the 8-bit value of the output. These registers can be loaded, with data, and contain a set of control logic for incoming data, accepting 8-bits at each load clock cycle. The data passed into the shift register then passes through multiplexers and a common serial line to the first latch, where it is held before clocking out via the parallel output bus. By this way, data can be sequentially shifted through the register, allowing for controlled access to the register\'s stored state.

In terms of timing, the clock pulse rate must be faster than the data load rate. The shift rates of the CD74HC595E allow for a high speed serial-in data transfer of up to 30MHz in synchronous serial applications where the data rate is clocked into the register at a fixed rate. This makes it a great choice for applications that require high speed parallel I/O access.

In summary, the CD74HC595E is a low voltage logic shift register that is particularly suitable for microcontroller-based systems, offering 8-bit parallel data outputs. It makes use of two clock lines and is capable of high speed serial-in data transfer up to 30MHz. The CD74HC595E is a great choice for applications that require high speed parallel I/O access.

The specific data is subject to PDF, and the above content is for reference