CD74HC597M96

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74HC597M96 is a high-voltage, high-current 8-bit buffered input/output register with a 3-state output buffer. It is programmable with each of the eight separate output states and has the ability to shift both logic 1s and 0s through the registers. This chip is designed to operate over the range of 4.5 to 5.5 V, with a minimum supply voltage of 4.5 V, and an output current of 24 mA at VCC = 5 V.

The CD74HC597M96 is a perfect fit for applications in which bits must be shifted from one register to another, such as in devices which require buffered data shifting and output logic. Some applications which could benefit from the use of this chip include industrial control systems, logic signal monitoring, serial communication interfaces, and test instrumentation.

The chip works on the basic principle of storing digital data in the form of bits, where one bit represents either a 0 or a 1. To move the logical data from one register to another the register must be shifted. The input is provided to the shift register, which then shifts it through the registers sequentially, before eventually providing the output to the device.

The CD74HC597M96 also features provisions for daisy-chaining multiple chips together to increase the number ofbits that can be shifted. This allows for larger data streams to be shifted and allows for greater control of complex systems. The chip utilizes advanced CMOS technology, allowing for very low stand-by current, and wide temperature operating range.

The CD74HC597M96 requires only one clock signal to complete all 8-bit transfers. The chip is designed so that it only needs to complete one instruction cycle to write an entire data byte. Data integrity is maintained with the help of the Status Flag, which indicates the occurrence of an instruction cycle in progress.

The inputs of this chip are TTL compatible and noise immunity is provided for its output lines. The pinout is standard, with a power supply voltage pin, an input latch load pin, an enable pin, a data register select pin, an output enable pin and two active low enable pins. The outputs are provided with high-current buffers and are guaranteed to remain in the logic state they were put in.

The CD74HC597M96 is an excellent choice for applications requiring high-current data shifting and buffering. It is highly reliable, has a wide temperature operating range, and is pin-compatible with other CD74HC597M96 models. With its powerful features, it is a great option for the expanding markets of Industry 4.0.

The specific data is subject to PDF, and the above content is for reference