CDBMH220-HF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electrical components used in electrical and electronic circuits, typically to allow current to flow in one direction but not the other. Rectifiers are diodes used to convert alternating current (AC) to direct current (DC). Single rectifiers are diodes that consist of a single layer of semiconductor material, like the CDBMH220-HF.

The CDBMH220-HF consists of a silicon crystal with a layer of ultra-thin passivated oxide. This layer helps to reduce the majority carrier drift, allowing for a higher reverse break down voltage. It also increases the reverse recovery time, meaning the diode has an improved rectification performance, allowing for higher efficiency.

The CDBMH220-HF is usually used in applications requiring a very high forward voltage drop. It is also useful for applications which require a high rectification efficiency. It can be used in a wide range of different circuit applications, such as switching regulators and flyback converters. Additionally, the diode is suitable for automotive applications, and can be used in a temperature range of -55 ºC to 125 ºC.

The CDBMH220-HF has two terminals, the cathode and the anode. The cathode is marked with a minus sign (-), indicating that it is the negative side of the diode. When a voltage is applied to the diode, the positive side, or anode, is positive relative to the cathode. When the flow of electricity is in the intended direction, the diode is said to be in its forward-biased state. In this state, the current flows relatively easily from the anode to the cathode of the diode.

In reverse-bias, the anode is negative relative to the cathode and very little current flows. Generally speaking, the amount of current that flows through a diode in reverse-bias is very small. This is because when negative voltage is applied to the diode, the width of the depletion layer increases, making it difficult for current to pass through the diode.

The CDBMH220-HF has a 125V reverse break down voltage and a 1.5A forward current rating. This means it can handle higher voltages and more current than many other single rectifier diodes. The diode also has a high reverse recovery time, reducing heat losses and ensuring its efficiency under high currents.

In summary, the CDBMH220-HF is a single rectifier diode suitable for applications which require very high forward voltage drops and high rectification efficiency. It has two terminals, the anode and the cathode, and offers a 125V reverse break down voltage and a 1.5A forward current rating. Additionally, its high reverse recovery time helps to reduce heat losses and enables it to operate efficiently under high currents.

The specific data is subject to PDF, and the above content is for reference