CDBMTS1200-HF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CDBMTS1200-HF represents a kind of single rectifier diodes which are widely used to convert alternating current (AC) to direct current (DC) in a wide range of applications. This article will look at CDBMTS1200-HF and its application field, as well as its working principle.

The CDBMTS1200-HF diodes feature a high forward surge current handling capability and a low forward voltage drop. It has a maximum repetitive peak reverse voltage of 1000V, and a maximum average forward current of 15A. The average forward voltage drop is between 1.2V and 1.6V.

CDBMTS1200-HF are mainly used in a variety of power supplies, such as telecommunications, power supplies, and lighting applications. Due to its low forward voltage drop, it is also used in switching power supplies and signal processing applications. It is suitable for high efficiency application and rated at a temperature lower than 105°C.

The working principle of CDBMTS1200-HF is simple. When an alternating current (AC) signal is applied to its anode, the current flows through it and creates a continuous flow of direct current (DC). The diode converts the AC signal into DC by rectifying the current, that is why these kinds of diodes are called rectifiers.

The rectifying process of the CDBMTS1200-HF occurs when the anode voltage reaches the forward threshold voltage of the device. When the voltage exceeds this threshold, the diode switches from reverse to forward bias and it starts to conduct current. The diode continues to conduct in the forward direction until the anode voltage falls below the reverse threshold voltage, at which point it becomes reverse biased again and the current stops flowing.

Although the CDBMTS1200-HF is a single device, it can be connected in series or in parallel with other diodes to increase the current handling capability and the reverse voltage ratings. When used in parallel, the maximum reverse voltage is increased, while the forward voltage drop is slightly decreased.

The CDBMTS1200-HF is an efficient diode for converting AC to DC. Due to its low voltage drop and high current rating, it can be used in a variety of applications where efficient rectification is needed. It can be used in power supplies, signal processing applications, and in high efficiency applications. It is also suitable for use in telecommunication, power supplies and lighting systems.

The specific data is subject to PDF, and the above content is for reference