CDBU0330-HF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A CDBU0330-HF is a rectifying diode made from a silicon semiconductor material. It has a moderately high forward surge current of 33 amps and a reverse current leakage under reverse voltage of 10 µamp. Rectifiers are used for rectifying incoming alternating currents into direct currents. This particular device has various applications and uses a particular principle of operation.

Application

The CDBU0330-HF is most commonly used in a variety of power supplies or adapters which take in alternating currents, rectify them and output a direct current which can then be used by any device which requires a consistent direct current like a laptop, cell phone or anything that runs on a consistent DC voltage. It is also used in industrial areas especially where DC harmonic suppression is needed since it operates at higher frequencies. It even finds its applications in motor control and in flyback converters. All these applications occur due to its moderate forward surge current of 33 amps and the reverse current leakage of 10 µA.

Principle of Operation

Like all other rectifiers, the CDBU0330-HF is also a diode which lets current pass through in only one direction. This phenomenon is known as unidirectional conductivity. It occurs as a consequence of the structure of the CDBU0330-HF; the N-type material passes electrons to the P-type material below it. This gives rise to an "N" shaped structure when looked at from the side with the N-material at the top and the P-material below. When a positive voltage is applied across the junction (from the N-type material) the electrons flow from the N-type to the P-type material and current starts flowing from the cathode to the anode. This is the forward bias and it can sustain a current up to 33 amps for this particular rectifier for a specific period of time.

When the voltage polarity is reversed, the current flow is blocked due to the repulsive forces exerted by the electrons in the two regions. This phenomenon is known as reverse bias and its characteristics are used in various applications as mentioned above. Under a reverse voltage, only a small current of 10 µA can cross the barrier and this characterises the diode as having a low reverse leakage.

The unidirectional function of the CDBU0330-HF is used in rectifying alternating currents by allowing only the positive half-cycles to pass and blocking the negative half-cycles. This effectively converts alternating current into direct current and is consequently used in various power supply applications.

Conclusion

The CDBU0330-HF is a silicon rectifying diode which is useful in power supplies, motor control and flyback converters. It has a forward surge current of 33 amps and a reverse leakage of 10 µA. Due to its unidirectional conductivity, the application of a positive voltage causes electric current to flow from the cathode to the anode whereas a negative voltage will block all electric current from crossing the barrier, making it perfect for various rectifying applications.

The specific data is subject to PDF, and the above content is for reference