CDSH3-99-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are scientific components which are used to control the flow of electricity through an electrical circuit. A diode consists of two p-n junctions, one with a positive terminal and the other with a negative terminal. The negative terminal is called the cathode and the positive is the anode. A diode allows current to flow in one direction and blocks it in the opposite direction. Diodes are used in many aspects of our daily lives and are found in almost all electronic devices.

Rectifiers are electronic components which are used to convert alternating current (AC) to direct current (DC). Rectifiers are made up of diodes and are used in AC power supplies to convert alternating current to direct current. Rectifiers have many uses in the world of electronics, such as allowing DC motors to run on AC current, as well as providing power to operate computer systems and other DC devices.

Arrays are sets of diodes and/or rectifiers that are arranged in a specific pattern on a circuit board. Arrays are commonly used to group multiple diodes in a parallel or series configuration, which allows the components to be assembled very quickly and with less soldering. Arrays can also be used to create different types of voltages or currents and can also be used to protect components from overvoltage and overcurrent.

CDSH3-99-G applications are typically found in the field of rectifiers and arrays. It is a 3-phase four-diode bridge rectifier for applications that require higher current ratings or a low conduction loss. It is used to create DC from a three-phase AC line with rated currents from 300 A to 600 A. It has a continuous rectified output voltage of up to 600 V and a maximum reverse voltage of 400 V. The device is also capable of withstanding up to 3,000 V Surge.

The working principle of CDSH3-99-G is based on the diode’s simple ability to allow current to flow in only one direction. The device consists of four diodes arranged in a bridge rectifier configuration. Each diode is connected to the corresponding phase of the input AC line, with each diode allowing current to flow in the direction it is connected. Thus, the diodes act like a bridge to enable the current to flow in only one direction and create a direct current.

In conclusion, CDSH3-99-G applications are typically used in rectifiers and arrays. It is a three-phase four-diode bridge rectifier that is capable of providing rated currents from 300 A to 600 A. The working principle of CDSH3-99-G is based on the simple ability of a diode to allow current to flow in only one direction. Diodes are integrated in a bridge rectifier configuration to allow for high ratings and low conduction loss in the conversion from AC to DC.

The specific data is subject to PDF, and the above content is for reference