CDSW20-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CDSW20-G is a single-phase, full-wave rectifier designed for use in a wide variety of applications. It is a small, low-cost, high-efficiency, highly reliable device. The CDSW20-G can handle up to 16 amperes of continuous current and can operate at up to 40 volts of peak reverse voltage. It is available in four package sizes: SOT-23, SOT-223, SOT-323, and SDS-7L.

The CDSW20-G is a diode bridge that can be used to rectify alternating current (AC) to direct current (DC). The rectified current is typically smoothed out with a filter, such as a capacitor bank, to produce a more stable DC voltage. The CDSW20-G has four terminals; two for the input AC voltage and two for the output of the rectified DC voltage.

The working principle of the CDSW20-G is simple and efficient. Its four terminals allow the alternating current (AC) input to flow through two of the diodes, connected in series, on each cycle of the wave. In other words, the diodes are arranged in pairs, with each pair forming a rectifier leg. When the AC input is positive, current will flow through the lower diode in each pair, while the higher diode blocks current in the opposite direction. This causes the wave to be "clipped", generating a DC output that is a scaled version of the input wave.

The CDSW20-G can be used in a variety of applications such as alternating current to direct current (AC/DC) power conversion, motor drives, inverters, and other power conversion equipment. It is also suitable for power supply applications, especially in grid-tied photovoltaic systems. The CDSW20-G is particularly well-suited for these applications due to its low cost, high efficiency, and reliability.

The CDSW20-G is a single-phase, full-wave rectifier designed for use in a wide variety of demanding applications. It is a small, low-cost, high-efficiency, and highly reliable device. The CDSW20-G can handle up to 16 amperes of continuous current and can operate at up to 40 volts of peak reverse voltage. It is available in four package sizes: SOT-23, SOT-223, SOT-323, and SDS-7L. Its simple design and efficient working principle make the CDSW20-G well-suited for a variety of applications, ranging from AC/DC power conversion to motor drives and inverters. The CDSW20-G provides an excellent solution for those looking for an affordable, reliable, and efficient rectifier.

The specific data is subject to PDF, and the above content is for reference