CE3391-133.000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

The CE3391-133.000 is an oscillator with several applications in the electronics industry. It has been used in military and commercial applications, as well as used in the laboratory for research and testing purposes.

The CE3391-133.000 is a four-pin dual-sided transistor based oscillator. It has three external control pins that can be used to configure the duty cycle, frequencies and other settings. The output from the device is a square wave with a duty cycle is adjustable between 0% and 100%. This makes the device ideal for precise clock frequency control.

The CE3391-133.000 is capable of producing frequencies ranging from 1kHz up to 10 MHz. It is important to note however, that the external pins of the device must be configured correctly to obtain the desired frequency. Additionally, the device is temperature compensated and is suitable for use in environments with high levels of vibration.

The oscillator also offers excellent noise immunity. This is due to the use of an active feedback circuit with a low ripple output. This ensures that the input signal remains within a small range even when the external parameters are changing.

The CE3391-133.000 is designed to reduce power consumption and increase reliability. The device operates at an optimal voltage of 3-5 volts and draws only 3-4 mA of current. This makes the device ideal for applications in which energy efficiency is important. Additionally, the device offers protection against overvoltage, short circuit, and over temperature.

The CE3391-133.000 is a versatile device that can be used in a variety of applications. In communication systems, it can be used for frequency control in AM and FM detectors. In motor control, it can be used to generate precisely timed pulses for controlling the speed of a motor. In TV sets, it can be used for horizontal and vertical synchronization. In laboratories, it can be used to generate clock pulses for testing and research purposes.

The working principle of the CE3391-133.000 is based on the generation of a square wave by means of a transistor switch. The transistor is turned on and off by an external control pin. An internal voltage-controlled oscillator (VCO) generates the switching frequency. This frequency is then shaped into an output signal by means of a filter network.

The CE3391-133.000 oscillator offers several advantages. It is stable over a wide input voltage range, provides precise frequency control and offers a high slew rate. It is ideal for applications where accuracy and reliability are important. The CE3391-133.000 is a reliable device with a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference