CEG1-35742-5-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are among the most important tools used to protect the electrical circuits from getting damaged due to voltage overloads, inappropriate wiring connections, and other such issues. In this article, we will discuss the application field and working principle of CEG1-35742-5-V, which is a special type of circuit breaker.

The CEG1-35742-5-V circuit breaker is designed for use in low voltage applications such as residential and small commercial electrical installations. It can be used in places that require the protection of low voltage circuits from a low voltage switch board up to 600A. It is also suited for applications that need an automatic disconnection of loads in case of short circuit or overload.

The CEG1-35742-5-V circuit breaker is similar to a standard circuit breaker in its design and uses a plunger mechanism to open and close the contacts. The plunger is connected to a coil beneath the breaker and when a certain pre-determined current is detected, the plunger moves swiftly to the open position, thus cutting off the current passing through it. The plunger then remains in the open position until the current has reduced to a safe level. The plunger then moves back to its normal closed position thus allowing the current to pass through the circuit again.

The CEG1-35742-5-V is designed with a single pole, thermally operated, and circuit breaker rating type. It also has an overload protection trip factor of up to 500%, and undervoltage protection trip factor of up to 300%. The rated current for the breaker is 12 A and the rated voltage is 250V. It also has a maximum interrupting rating of 10 kA and is UL Listed and CSA Certified. The insulation voltage rating of the breaker is 300V and it has a maximum operating temperature of 105°C.

The CEG1-35742-5-V also has a range of accessories to aid in its easy installation and usage. These accessories include a seal ring, mounting screws, an operating handle, and an instruction manual. The seal ring helps ensure a dust and water tight seal to the breaker while the mounting screws ensure that the breaker is securely fastened to the operation switchboard. The operating handle helps in turning the breaker on and off and the instruction manual provides comprehensive information on how to safely install and use the breaker.

The CEG1-35742-5-V offers a number of advantages over other types of circuit breakers such as its low cost, easy installation, and overload and under voltage protection. It is also UL Listed and CSA Certified, thus ensuring its reliability and durability. In addition, the breaker is designed to meet the international safety standards and is covered by a manufacturer’s warranty.

In conclusion, the CEG1-35742-5-V is an ideal choice for low voltage applications, such as residential and small commercial installations. This breaker is easy to install and provides reliable overload and under voltage protection, which helps to ensure the safety of the circuit. It is also UL Listed and CSA Certified, thus ensuring its reliability and durability.

The specific data is subject to PDF, and the above content is for reference